general product catalogue complete range of regulators

EDITION JUNE 2003
SECOND STAGE
MEDIUM PRESSURE
P.3/20
PRODUCT DESCRIPTION DIMENSIONS
The Type 732B2 is an adjustable second-stage low pressure regulator
suitable to be installed in double stage pressure regulated
industrial installations.
This regulator cannot be used as single stage regulator, but they
always have to be installed after a 1st stage regulator.
The type 732B2 reduces the pressure at the outlet from the 1st
stage directly to the utilization pressure of the final appliances.
Gas regulation is possible by rotating the handle fitted on top of
this regulator. See diagram schematic: S-02 (page C17) and S03,
S04 (page C18) for installation system.
www.cavagnagroup.com
ACCESSORIES
On request, it is possible to supply a mounting bracket for the correct
position on every surface of the regulator Type 753B2.
On request The Type 753B2 can be equipped with a gauge for outlet
pressure checking.
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
OUTLET PRESSURE
(Depending on the gas)
Adjustable Medium Pressure
Second Stage Regulator
Type 732B2
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
Propane
0÷60 mbar
Butane/Propane 8 - 10 Kg/h -20 ÷ +50 °C
0÷150 mbar
Part 3
REGULATORS FOR
INDUSTRIAL AND
D.I.Y. USE
INSTALLATIONS
INLET CONNECTIONS
(pag. D01-D02-D03-D04)
TABLE D:
D02 - D06
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D06)
TABLE G:
G06