general product catalogue complete range of regulators

EDITION JUNE 2003
P.3/6
SINGLE STAGE
HIGH PRESSURE
PRODUCT DESCRIPTION
The Type 912 is an adjustable single-stage high-pressure regulator,
with a threaded inlet connection for direct connection to a cylinder
valve.
The Type 912 is constructed to control the prevailing cylinder pressure
reducing it directly down to the service appliance pressure.
Gas regulation is possible by rotating the handle fitted on top of
this regulator.
See diagram schematic: S-01 (page C17) for installation system.
- Homol. UL (U.S.A.)
www.cavagnagroup.com
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
Propane
Butane/Propane
HOMOLOGATIONS*
ACCESSORIES
On Request The Type 912 can be equipped with a gauge for outlet
pressure checking.
OUTLET PRESSURE
(Depending on the gas)
0÷3 mbar
0÷4 mbar
200÷500 mbar
Adjustable High Pressure
Single Stage Regulator
Type 912
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
6 - 8 - 10 Kg/h -20 ÷ +50 °C
Part 3
REGULATORS FOR
INDUSTRIAL AND
D.I.Y. USE
INSTALLATIONS
DIMENSIONS
INLET CONNECTIONS
(pag. D01-D02-D04)
TABLE A:
A01 - A04 - A11 - A20
A24 - A26 - A29 -
TABLE D:
D02
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D05-D06-D07)
TABLE F:
F04 - F09
TABLE G:
G02
TABLE H:
H04 - H07 - H08