general product catalogue complete range of regulators

SECOND STAGE
LOW PRESSURE
PRODUCT DESCRIPTION
The Type 754B2 is a second-stage low pressure regulator suitable
to be installed in double stage pressure regulated domestic installations.
This regulator cannot be used as single stage regulator,
but always has to be installed after a 1st stage regulator. The type
754B2 reduces the pressure at the outlet from the 1st stage
directly to the utilization pressure of the final appliances.
See diagram schematic: D-14 and D-24 (page C07, C12) for installation
system.
ACCESSORIES
On request, it is possible to supply a mounting bracket for the correct
position on every surface of the regulator Type 754B2
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
Butane
Propane
Butane/Propane
HOMOLOGATIONS*
- Compliance with BS 3016 (U.K.)
OUTLET PRESSURE
(Depending on the gas)
28 - 30 - 37 - 50
Low Pressure
Second Stage Regulator
Type 754B2
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
10 Kg/h -20 ÷ +50 °C
Part 1
Part 1
REGULATORS FOR
DOMESTIC USE
INSTALLATIONS
DIMENSIONS
INLET CONNECTIONS
(pag. D02-D04)
TABLE A:
A31
TABLE D:
D01 - D02
TABLE E:
E04
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D06-D07)
TABLE G:
G03 - G04
TABLE H:
H07
www.cavagnagroup.com
P.1/39
EDITION JUNE 2003