general product catalogue complete range of regulators

EDITION JUNE 2003
SINGLE STAGE
HIGH PRESSURE
P.3/12
PRODUCT DESCRIPTION DIMENSIONS
The Type 932 is an adjustable single-stage high-pressure regulator,
with a threaded inlet connection for direct connection to a cylinder
valve.
The Type 932 is constructed to control the prevailing cylinder pressure
reducing it directly down to the service appliance pressure.
Gas regulation is possible by rotating the handle fitted on top of
this regulator.
See diagram schematic: S-01 (page C17) for installation system.
- Homol. DVGW (German)
On Request The Type 932 can be equipped with a gauge for outlet
pressure checking.
www.cavagnagroup.com
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
Propane
Butane/Propane
HOMOLOGATIONS*
ACCESSORIES
OUTLET PRESSURE
(Depending on the gas)
0,5÷4 mbar
Adjustable High Pressure
Single Stage Regulator
Type 932
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
5 - 12 - 18 Kg/h -20 ÷ +50 °C
Part 3
REGULATORS FOR
INDUSTRIAL AND
D.I.Y. USE
INSTALLATIONS
INLET CONNECTIONS
(pag. D01-D02-D04)
TABLE A:
A01 - A02 - A07
A08 - A11 - A20
TABLE D:
D02
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D06-D07)
TABLE G:
G02
TABLE H:
H04