general product catalogue complete range of regulators

EDITION JUNE 2003
P.1/48
SECOND STAGE
LOW PRESSURE
PRODUCT DESCRIPTION
The Type 763 is a second-stage low pressure regulator suitable to
be installed in double stage domestic installations up to 30 Kg/h
capacity.
The type 763 reduces the pressure at the outlet from the 1st stage
directly to the utilization pressure of the final appliances.
Furthermore, it is possible to set up manually the outlet pressure.
This regulator cannot be used as single stage regulator, but always
has to be installed after a 1st stage regulator.
See diagram schematic: D-25 (page C13) for installation system.
www.cavagnagroup.com
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
Propane
Butane/Propane
ACCESSORIES
On request, it is possible to supply a mounting bracket for the correct
position on every surface of the regulator Type 763.
OUTLET PRESSURE
(Depending on the gas)
Low Pressure
Second Stage Regulator
Type 763
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
30 - 37 mbar 30 Kg/h -20 ÷ +50 °C
Part 1
Part 1
REGULATORS FOR
DOMESTIC USE
INSTALLATIONS
DIMENSIONS
INLET CONNECTIONS
(pag. D04)
TABLE D:
D04
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D06-D07)
TABLE G:
G08
TABLE H:
H06