general product catalogue complete range of regulators

SECOND STAGE
LOW PRESSURE
PRODUCT DESCRIPTION
The Type 734B2 is a second-stage low pressure regulator suitable
to be installed in double stage domestic installations for capacities
up to 10 Kg/h.
This regulator cannot be used as single stage regulator, but always
has to be installed after a 1st stage regulator.
The type 734B2 reduces the pressure at the outlet from the 1st
stage directly to the utilization pressure of the final appliances.
See diagram schematic: D-25 (page C13) for installation system.
- Body
MATERIALS
: Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
Butane
Propane
Butane/Propane
ACCESSORIES
On request, it is possible to supply a mounting bracket for the correct
position on every surface of the regulator Type 734B2
OUTLET PRESSURE
(Depending on the gas)
Low Pressure
Second Stage Regulator
Type 734B2
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
28-30-37-50 mbar 10 Kg/h -20 ÷ +50 °C
Part 1
Part 1
REGULATORS FOR
DOMESTIC USE
INSTALLATIONS
DIMENSIONS
INLET CONNECTIONS
(pag. D04)
TABLE D:
D02 - D06
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D06)
TABLE G:
G06
www.cavagnagroup.com
P.1/41
EDITION JUNE 2003