general product catalogue complete range of regulators

PRODUCT DESCRIPTION
The Type 96 Pressure Regulators are manufactured in order
to supply the highest performance as Gas Appliance
Regulators, in compliance with ANSI Z21.18 CGA 6.3.
The Type 96 pressure governors are intended for use in
main burner and pilot load applications, they feature precise
regulating control from full flow down to tiny pilot flows.
This model is available in fixed or adjustable outlet pressure
where small adjustments can be made to the outlet pressures
on installation with the appliance.
See installation schematics: N-01 (page C19).
- Homol. AGA(Australian)
- Homol. CSA (Canada)
SAFETY DEVICES
Fixed orifice
On request it is possible for the manufactured models type
96 to have a fixed orifice on the cover which limits the leakage
in case of diaphragm rupture.
In addition the vent hole is supplied with 1/8” NPT thread to
allow the connection to on external vent line.
HOMOLOGATIONS*
Pressure Governor
Type 96
TECHNICAL FEATURES*
GAS INLET PRESSURE OUTLET PRESSURE CAPACITY RANGE
Natural Gas
Butane/Propane
1/2 PSI (34,5 mbar)
2 PSI (138 mbar)
min 2,8” w.c. (7 mbar)
max 12” w.c. (30 mbar)
Part 5
PRESSURE GOVERNORS
INSTALLATIONS
DIMENSIONS
MATERIALS
- Body : Aluminium die casting
- Spring: : Steel
- Diaphragms : Nitrile Rubber
WORKING
TEMPERATURE
150÷65.000 BTU/hr -40 ÷ +96 °C
INLET CONNECT.
(pag. D04)
TABLE D:
D01 - D02 - D03 - D04
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECT.
(pag. D06)
TABLE G:
G01 - G02 - G03 - G04
www.cavagnagroup.com
P.5/1
EDITION JUNE 2003