general product catalogue complete range of regulators

EDITION JUNE 2003
P.4/2
PRODUCT DESCRIPTION DIMENSIONS
The Type 51 is an clip-on adaptor with an inlet connection designed
to fit automatic/self closing cylinder valves 35 mm in diameter.
Connection to the gas cylinder occurs by placing the adapter onto
the automatic valve and raising the latching ring, then pressure
should be exerted downwards to achieve a tight fit with the automatic
valve.
Gas opening and closing is possible by rotating the handle fitted
on top of this regulator.
The adapter Type 86 can be used for the direct connection of industrial
appliances, see installation schematics R-01 ( page C19) or
to adapt a regulator with threaded inlet into an automatc valve, see
installation schematics R-02 ( page C19).
Furthermore, the adapter Type 86 can be used in installations with
several cylinders, with automatic valves, enabling the connection
with the automatic changeover or a manifold, see installation schematics
R-03 and R-04 ( page C19).
www.cavagnagroup.com
MATERIALS
- Body : Die Cast Zinc/Painted
GAS
Butane
Propane
Butane/Propane
OUTLET PRESSURE
(Depending on the gas)
Adapters
JUMBO KOSAN Type 86
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
- - -20 ÷ +50 °C
INSTALLATIONS
INLET CONNECTIONS
(pag. D03)
TABLE B:
B08
Part 4
Part 4
ADAPTERS
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D07)
TABLE H:
H02 - H04 - H11 - H13