general product catalogue complete range of regulators

PRODUCT DESCRIPTION
The Type 904 is a first-stage high pressure regulator with threaded
inlet connection for direct attachment to the tank. This regulator
is suitable for double stage pressure regulated domestic
installations. The type 904 used as a first stage regulator reduces
the pressure at the outlet of the tank, in order to deliver a medium
pressure to the second stage regulator. Installation of Type 904
should always be completed by a second-stage regulator which
further reduces the delivery pressure from the first-stage down to
the operating pressure. See diagram schematic: D-25, D-26 and
D28 (pages C13, C14) for installation system.
- Homol. NF (France)
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
Propane
Butane/Propane
ACCESSORIES
FIRST STAGE
HIGH PRESSURE
On Request the Type 904 can be equipped with a gauge for checking
the leak-tightness of the complete installation.
HOMOLOGATIONS*
OUTLET PRESSURE
(Depending on the gas)
High Pressure
First Stage Regulator
Type 904
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
1 - 1,5 bar 40 Kg/h -20 ÷ +50 °C
Part 1
Part 1
REGULATORS FOR
DOMESTIC USE
INSTALLATIONS
DIMENSIONS
INLET CONNECTIONS
(pag. D01-D02-D04)
TABLE A:
A01 - A11 - A24 - A31 - A32
TABLE D:
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
D02
OUTLET CONNECTIONS
(pag. D06 -D07)
TABLE G:
G04
TABLE H:
H07
www.cavagnagroup.com
P.1/35
EDITION JUNE 2003