general product catalogue complete range of regulators

SINGLE STAGE
HIGH PRESSURE
Part 3
REGULATORS FOR
INDUSTRIAL AND
D.I.Y. USE
PRODUCT DESCRIPTION DIMENSIONS
The Type 902B1 is an adjustment single-stage high-pressure regulator,
with a threaded inlet connection for direct connection to a
cylinder valve.
The Type 902B1 is constructed to control the prevailing cylinder
pressure reducing it directly down to the service appliance pressure.
Gas regulation is possible by rotating the handle fitted on top of
this regulator.
See diagram schematic: S-01 (page C17) for installation system.
On Request The Type 902B1 can be equipped with a gauge for
outlet pressure checking.
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
Propane
Butane/Propane
ACCESSORIES
OUTLET PRESSURE
(Depending on the gas)
0÷3 bar
0÷5 bar
0,5÷2 bar
Adjustable High Pressure
Single Stage Regulator
Type 902B1
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
40 Kg/h -20 ÷ +50 °C
INSTALLATIONS
INLET CONNECTIONS
(pag. D01-D02)
TABLE A:
A01 - A02 - A11 - A20 - A24
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D06-D07)
TABLE G:
G04
TABLE H:
H07 - H09
www.cavagnagroup.com
P.3/13
EDITION JUNE 2003