basiccolor display
basiccolor display
basiccolor display
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
asICColor <strong>display</strong><br />
by Color Solutions Software<br />
basICColor <strong>display</strong> now measures a few patches in a loop.<br />
While measuring, please adjust the brightness of your<br />
monitor in the OSD until the indicators on the right side of<br />
the window are within the green area of the diagram.<br />
After a few rounds of measurements the process will stop<br />
automatically. Restart the measurement if you are not satis-<br />
fied with the final result. Otherwise click and you<br />
will be guided back to the main window.<br />
. . Contrast (CRTs only)<br />
Open the measurement dialog by clicking .<br />
The contrast of your monitor should initially be set to maxi-<br />
mum. Position the instrument on the measurement patch<br />
and start the measurement by clicking .<br />
Please adjust the contrast via the OSD until the indicator is<br />
in the center of the diagram.<br />
When you are finished, click and to go back<br />
to the main window.<br />
. . Color temperature (LCDs and CRTs)<br />
Most of the monitor OSDs offer various possibilities to set<br />
the color temperature. If possible select a mode, that allows<br />
you to adjust each channel (R, G and B) separately. This is the<br />
most precise method to preset your monitor to the desired<br />
color temperature.<br />
1