mediaMAX EVO mediaMAX EVO S2 - FTE Maximal
mediaMAX EVO mediaMAX EVO S2 - FTE Maximal
mediaMAX EVO mediaMAX EVO S2 - FTE Maximal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENGLISH<br />
10 MEASUREMENTS<br />
28<br />
User’s Manual - <strong>mediaMAX</strong> <strong>EVO</strong> - <strong>mediaMAX</strong> <strong>EVO</strong> <strong>S2</strong><br />
Some of the parameters while you are measuring are confi gured independently in each band (tersat-catv).<br />
These parameters are the following ones: Vrf, 22KHz, DiSEqC switch, Carrier Mode, RBW<br />
Filter, Spectrum Resolution, Detector mode spectrum, and Span of the spectrum.<br />
The available measurements of <strong>mediaMAX</strong> <strong>EVO</strong> are the following:<br />
TERRESTRIAL BAND<br />
1.- Analog signal<br />
2.- Digital signal<br />
1. Level<br />
1. Power<br />
2. Video<br />
2. C/N (digital measurement)<br />
3. Audio<br />
3. Noise Margin<br />
4. Video / audio difference<br />
4. BER before Viterbi<br />
5. C/N<br />
5. BER after Viterbi<br />
6. Sync pulse<br />
6. MER<br />
7. Errors<br />
SATELLITE BAND<br />
1.- Analog signal<br />
1. Level<br />
2. C/N<br />
3. Sync pulse<br />
CABLE BAND<br />
1.- Analog signal<br />
1. Level<br />
2. Video<br />
3. Audio<br />
4. Video / audio difference<br />
5. C/N<br />
2.- Digital signal<br />
Power<br />
C/N (digital measurement)<br />
Noise Margin<br />
BER before Viterbi<br />
BER after Viterbi<br />
MER<br />
Errors<br />
2.- Digital signal<br />
Power<br />
Noise Margin<br />
BER before Viterbi<br />
MER<br />
Errors<br />
Note: Noise Margin is defi ned as the difference between the value of the current C/N and the value<br />
of the C/N in the pixelation point of the signal. That is, is the quantity of dB’s of the C/N measure<br />
that is missing until losing the signal.<br />
1.<br />
2.<br />
3.<br />
4.<br />
5.<br />
6.<br />
7.<br />
1.<br />
2.<br />
3.<br />
4.<br />
5.<br />
Reserved of technical modifi cations and/or errors<br />
rev 2.2