mediaMAX EVO mediaMAX EVO S2 - FTE Maximal
mediaMAX EVO mediaMAX EVO S2 - FTE Maximal
mediaMAX EVO mediaMAX EVO S2 - FTE Maximal
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENGLISH<br />
46<br />
User’s Manual - <strong>mediaMAX</strong> <strong>EVO</strong> - <strong>mediaMAX</strong> <strong>EVO</strong> <strong>S2</strong><br />
These three options could be combined as follow:<br />
1.- “tv” and “spectrum”. This two options together represents signal picture (in case of digital carriers,<br />
this mode will represent the fi rst program of FTA (free to air) terrestrial multiplex and satellite<br />
transponders) and frequency spectrum. For analog signals this option does not show the image.<br />
2.- “tv” and “meter”. These two active options represents image and measurements.<br />
For analog signals the monitor is divided in four areas: status bar, syncro pulse, channel picture and<br />
graphic bar with signal level.<br />
With digital signals the monitor represents three differents sections: status bar, picture of the fi rst<br />
program of FTA (free to air) digital carriers, and one section with measurements (power, Noise Margin,<br />
BER before and after Viterbi and graphic bar with Quality.<br />
Note: The quality graphic bar is based on the Noise Margin measure. As long as the Noise Margin<br />
measure is equal or higher the maximum value that the meter is able to represent, the bar will be<br />
shown in 100%.<br />
Reserved of technical modifi cations and/or errors<br />
rev 2.2
Change language