7.6.1.0 - Force10 Networks

monitor accounting
FTOS does not support periodic interim accounting, because the periodic command can cause heavy
congestion when many users are logged in to the network.
No specific show command exists for either RADIUS or TACACS+ accounting. To obtain accounting
records displaying information about users currently logged in, perform the following task in Privileged
EXEC mode:
Command Syntax Command Mode Purpose
show accounting CONFIGURATION Step through all active sessions and print all the
accounting records for the actively accounted
functions.
accounting attribute-value pairs
The network access server monitors the accounting functions defined in either TACACS+ attribute/value
(AV) pairs or RADIUS attributes, depending on which security method you have implemented.
In the following sample configuration, TACACS+-style accounting is used to track all usage of EXEC
commands and commands on privilege level 15.
aaa accounting default exec start-stop tacacs+
aaa accounting command 15 start-stop tacacs+
System accounting can use only the default method list:
aaa accounting default system start-stop tacacs+
configuring accounting for terminal lines
Use the following commands to enable accounting with a named method list for a specific terminal line
(where com15 and execAcct are the method list names):
Force10(config-line-vty)# accounting commands 15 com15
Force10(config-line-vty)# accounting exec execAcct
FTOS Configuration Guide, version 7.6.1.0 105