7.6.1.0 - Force10 Networks

Figure 207 shows how to define a QoS input policy name.
Force10#config t
Force10(conf)#qos-policy-input QosPolicy25
Force10(conf-qos-policy-in)#end
Force10#
Figure 207 qos-policy-input Command Example
assign input aggregate policy to input policy maps
Use this command to assign an input aggregate policy to input policy-map:
Command Syntax Command Mode Usage
policy-aggregate qos-policy-name CONFIGURATIO
N policy-map-input
To remove a policy aggregate configuration, use no policy-aggregate qos-policy-name command.
Figure 208 shows how to assign input aggregate policy to input policy maps.
Force10#config t
Force10(conf)#policy-map-input PolicyMapInput
Force10(conf-policy-map-in)#policy-aggregate QosPolicyInput
Force10(conf-policy-map-in)#end
Force10#
Figure 208 policy-aggregate Command Example
qos-policy-name
Enter the name of the policy map in character format
(16 characters maximum). This specifies the input QoS
policy assigned in policy-map-input context.
FTOS Configuration Guide, version 7.6.1.0 295