User's Manual - Newegg.com

PB
PR
PB
PR
Connections & Setup
Advanced Audio Connection Information
With the audio versatility of your HDTV, you can choose various connection options depending on the type
and quality of sound that you want. From good to best sound, choose one of the options or refer to the user’s
manual of each device that you are connecting to get the best results.
• Use your TV’s internal speakers (good sound).
• Connect an audio receiver (speakers connected to receiver) to your TV (better sound).
• Connect an audio receiver (speakers connected to receiver) to your TV using the DIGITAL AUDIO OUTPUT
(OPTICAL) jack (best sound)
INPUT 1
INPUT 2
COMPONENT/COMPOSITE COMPOSITE
INPUT 3
INPUT 4
COMPONENT/COMPOSITE COMPOSITE
AUDIO
SVGA INPUT
VGA/SVGA/XGA
WIRED
REMOTE
CONTROL
(IR)
ANTENNA
INPUT
Y/VIDEO
L
VIDEO
Y/VIDEO
L
VIDEO
FIXED/VARIABLEE
R
L
R
L
HDMI 1 INPUT
HDMI 2 INPUT
DIGITAL
AUDIO
OUTPUT
For Factory
use only
CABLE
INPUT
S-VIDEO
R
S-VIDEO
R
DIGITAL
AUDIO
OUTPUT
FIXED/VARIABLE
AUDIO OUTPUT
(OPTICAL)
L
R
Red
White
Audio cables are color
coded- Red= right
audio; white= left
audio
Digital Optical
cable
Connecting Your TV to an Audio/Video Receiver
For better sound quality than the TV’s internal speakers, connect to an audio receiver using audio cables to the
TV’s AUDIO OUTPUT jacks.
• Use the FIXED/VARIABLE AUDIO OUTPUT for a more advanced connection. Connect the FIXED/
VARIABLE AUDIO OUTPUTS from the TV to an A/V receiver using audio cables.
Be sure to go to the Fixed/Variable Out screen in the Advanced Audio menu and select whether you want the
FIXED/VARIABLE AUDIO OUTPUT jacks to send fixed or variable volume audio.
• Variable Output provides variable-level audio output. Volume levels are controlled by the TV’s volume.
• Fixed Output provides fixed-level audio output from the TV. This audio output is ideal for connecting
to an A/V receiver that has its own volume control.
Connecting Your TV to a Receiver with Dolby® Digital
If you own a receiver with Dolby® digital decoding or PCM (Pulse-Code Modulation) that uses an optical cabletype
input, connect an optical cable for excellent audio quality.
• Connect one end of the optical cable to the DIGITAL AUDIO OUTPUT (OPTICAL) jack on your TV and
to the Digital Optical Input jack on your receiver/amplifier receiver.
• If your receiver can decode Dolby digital and PCM, go to the Audio menu, select Advanced Audio
menu, then Digital Audio Output. Select AutoSelect (recommended) or PCM.
• If your receiver can decode only PCM, select PCM.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
18 Chapter 1