HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

More documents

Recommendations

Info

Force measurement and weighing technology Force sensors and display units Continued next page Parameters of electrical force sensors DNS sensors The sensitivity (e. g. 2 mV /V = (2 mV /V/N) is the modification of the output signal of a force transducer related to the corresponding nominal force (corresponds to the max. measurable force) with a supply voltage of 1 V. The actual size of the output signal at nominal force depends on the supply voltage made available by the display device/power pack. Example: force sensor LPX (mat. no. 44506), sensitivity 2 mV /V Display unit Supply voltage Output signal with nominal force MMV22, No. 44526 010 5 VDC 10 mV/n N* MEC 200-D, No. 44530 010 and 015 10 VDC 20 mV/n N* * n N = Nominal force of the force sensor (e. g. 500 N) Continued next page Force sensors PT4000 Execution: •measurement of tensile and compressive forces (FN see table) •overload limit >1.5 x FN •break load >3 x FN •sensitivity 3 mV/V •feed voltage 5 – 15 V DC •error limit 0.1 % of final value •cable length: 6 m Application only in conjunction with a display unit, e. g. type MMV22 or MEC-9163 (see No. 44526-44530 page 884) When placing order, please specify type of testing (tensile force or force of pressure)! Option: factory calibration certificate for tension or pressure testing at extra cost. Measuring range F N 0-500 N 0-1 kN 0-5 kN 0-10 kN Dimension A mm 13 13 19 25 Connection thread T M 8 x 1,25 M 8 x 1,25 M 12 x 1,75 M 12 x 1,75 44500 Ident. No. 006 011 055 105 Unit price E (O. R.) (O. R.) (O. R.) (O. R.) 44500 Workshop calibration certificate for tension or pressure Ident. No. 800 Unit price E (O. R.) h Force sensor 200N, 1kN, 20kN, 30kN and 50kN on request. Prod. Gr. 447 1 T 63,5 51 1,5 1,5 1 Cable Ø 4.2 mm A Testing equipment Continued next page Force sensors LPX Execution: •measuring compression forces up to 500 kN •multiple usage as very flat model •overload limit >1.5 x FN •sensitivity 2 mV/V •supply voltage 5-20 V DC •cable length: 3 m •error limit 0.3 % of final value Application only in conjunction with a display unit, e. g. type MMV22 or MEC-9163 (see No. 44526-44530 page 884) Option: factory calibration certificate at extra cost. Measuring range F N 0-250 N 0-500 N 0-1000 N 0-2500 N 0-5000 N 0-25 kN 0-50 kN 0-100 kN Dimensions A/Ø B mm 22/52 22/52 22/52 22/52 22/52 25/52 30/100 35/100 Dimensions C/D/Ø E mm 4/30/10 4/30/10 4/30/10 4/30/10 4/30/10 4/30/10 5/95/20 5/95/20 Connection thread F M 5 x 0,8 M 5 x 0,8 M 5 x 0,8 M 5 x 0,8 M 5 x 0,8 M 5 x 0,8 M 6 x 1 M 6 x 1 Ø G mm 44 44 44 44 44 44 85 85 44506 Ident. No. 002 005 010 025 050 250 500 600 Unit price E (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) 44506 Factory calibration certifi- Ident. No. 800 cate Unit price E (O. R.) Dimensioned sketch shows force sensor with antikink h On request: Miniature force sensors type OMF for small compressive forces of 20 N-500 kN and Ø (dimension B) 15 mm Miniature force sensors type LPH for pressure forces of 50 N-50 kN. Dimension B: Compressive forces
Force measurement and weighing technology Force sensors and display units Continued next page Measuring and display device models MMV 22 Application: stationary or mobile applications together with electric force sensors, wire strain gauges, weighing cells etc. Execution: •LCD display, height 10 mm, 4 1 /2 digit •automatic cut-off (pre-selectable time) •keypad with 6 function keys •peak value storage •measuring rate adjustable to approx. 25/33/50/100/200/500 measurements/sec. •supply voltage for force sensors / sensors: 5 V DC (max. 20 mA) •adjustable averaging •reversible input responsivity ± 10/± 20/± 50/± 80 mV for connecting sensors with different characteristic values •calibration switchover for up to 4 sensors with automatic identification •power supply 9 V DC (device can be used with mains supply unit, cordless with battery (9V E-block)) •dimensions: (W x D x H) 80 x 47 x 125 mm Scope of delivery: with battery pack 9 V/150 mAh, charger and power pack Options: •infrared interface with receiver for RS232, data memory for 100 measured values •data acquisition program 44526 Measuring and display device type MMV 22 Ident. No. 017 Unit price E (O. R.) Testing equipment 44526 Option: data recording program Ident. No. 014 Unit price E (O. R.) 44526 Spare part: Battery 9 V, 150 mAh Ident. No. 015 Unit price E (O. R.) 44526 Spare part: Charger for 9 Volt rechargeable battery, fast charging, maintenance charging Ident. No. 016 and battery renewal Unit price E (O. R.) 44526 Option: Infrared interface Ident. No. 018 Unit price E (O. R.) Prod. Gr. 447 Continued next page Measuring and display devices MEC-9163 Application: for force and torque measurements, weighing tasks with DMS sensors, for displacement and angle measurements and for temperature measurement with Pt100 sensors and thermo-elements. Also suitable for installation in control cabinets/control panels. Type •built-in housing, W x D x H = 96 x 150 x 48 mm cut-out in the front plate of the control cabinet W x H = 92 x 45 mm •LCD display 6 digit, height 13 mm, display reversible Red/green •keypad with 6 function keys •1 main input channel for DMS sensors sensitivity 1.5 up to 4 mV/V, sensor supply 5 or 10 V/60 mA, measuring rate: 500 measurements/s •2 auxiliary input channels for displacement, angle and temperature probes (voltage / current inputs) supply 15 or 24 V/150 mA, measuring rate: 100 measurements/s •memory max., max-min •4 relay output 250 VAC/30 VDC, 5 A •2 programmable inputs for TARA, peak value indication, hold-function •supply voltage 100-240 VAC Options: •analogue output: ranges 0-10 V, ± 10 V, max. 25 mA •RS232 interface: Baud rate adjustable from 1200-115200 Bit/s, max. transmission rate 30 measured values/s •bench housing for MEC-9163: plastic version with connection for mains plug, sensors, other inputs/ outputs, dimensions W x D x H = 174 x 198 x 100 mm, with foldable support legs 44530 Measuring and display device MEC-9163 Ident. No. 101 Unit price E (O. R.) 44530 Option: analogue output Ident. No. 105 Unit price E (O. R.) Ident. No. 101 Ident. No. 101 and 150 44530 Option: RS232 interface Ident. No. 110 Unit price E (O. R.) 44530 Option: Bench housing Ident. No. 150 Unit price E (O. R.) h on request: interfaces RS485, Profibus; software for evaluation and logging Prod. Gr. 447 884 2011/12
Page 1 and 2: Testing equipment Chapter overview
Page 3 and 4: Optical observation and control dev
Page 21 and 22: Hardness testing and metallography
Page 29 and 30: Ultrasonic cleaning Ultrasonic clea
Page 35 and 36: Force measurement and weighing tech
Page 41: Force measurement and weighing tech
Page 49 and 50: Layer and wall-thickness measuremen
Page 51 and 52: Layer and wall-thickness measuremen
Page 53 and 54: Temperature and ambient conditions
Page 59 and 60: Contour and roughness measurements
Page 61 and 62: Contour and roughness measurements
Page 63 and 64: Time, speed and frequency measureme

HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?