HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

More documents

Recommendations

Info

Layer and wall-thickness measurements Layer-thickness measuring devices Continued next page Layer thickness measuring devices model series 456C Types: •measuring devices with integrated probe (allows one-hand measurements on large-surface samples), Bigfoot measuring probeØ 25 mm, with prism cut, suited to measure flat and curved parts •measuring devices for separate measuring probes (for probes see) •both model series are available as F-, NF 1) and FNF-devices in the versions: B, S and T Overview selection with technical data see page 890. Common features: •measuring ranges 0-1500 μm •2.4" TFT-coloured monitor (320 x 240 pixels) with permanent background illumination – display automatically rotating 0°-90° – 180°-270° – various monitor displays adjustable: e.g. only measured value and statistic evaluations – display measurement method (F or NF), limit values, batches, etc. •ambient light sensor for automatic brightness control •high operating convenience (25 languages) thanks to large operating keys: the assigned function is shown on the TFT display •data interface Bluetooth (for PC, PDA or mobile phone) or USB •statistics: Number n, average value, max-min-measured value, standard deviation, variance. Versions S and T: Number of measurements > upper limit value and/or < lower limit value, adjustable acoustic/visual alarm •power supply 2 batteries (Mignon 1.5 V, type AA) 2) , alternatively, even rechargeable batteries can be used •software ElcoMaster 2.0 – data transfer from the Elcometer 456C, data filing and further processing – insertion of images (e. g. of the test object) or graphics – statistic evaluation (numerical and graphical) – Export to Excel or other data formats – individual preparation of reports and/or logs, generation of a PDF file – sending via e-mail directly out of ElcoMaster 2.0 – automatic software updating (internet connection required) Delivery: Measuring device, calibration foils (only measuring devices with integrated probe), USB cable (versions S and T), software ElcoMaster 2.0 (versions S and T on CD, version B as download), batteries, plastic bag (version B), case (versions S and T) Accessories: •USB Bluetooth adapter •USB connection cable, L approx. 1000 mm, for 456C version B Model 456C FBI1 FNFBI1 FBS FNFBS FNFSS FNFTS Version F FNF F FNF FNF FNF Version B B B B S T Measuring probe Integrated Integrated Separately 1) Separately 1) Separately 1) Separately 1) 45800 Ident. No. 600 605 610 615 620 625 Unit price E O. R. O. R. O. R. O. R. O. R. O. R. USB Bluetooth adapter USB cable 45800 Ident. No. 690 692 Unit price E (O. R.) (O. R.) Models 456C with integrated and/or separate measuring probe Testing equipment 1) Measuring probes are not included in the scope of delivery, see No. 45800 650 to 45800 665, page 891 2) Spare batteries see No. 56815 021 or 56815 122, page 1384 Prod. Gr. 451 Continued next page Measuring probes (selection): 1 straight version: T456C F1S or FNF1S 2 square version: T456C F1R or FNF1R Measuring probes for layer thickness measuring devices model series 456C for separate probe 3 miniature F-probe, square version, working height min. 16 mm 4 PINIP probes enable one-hand measurements 5 optimised probe connection 6 cable length approx. 800 mm 3 2 1 5 4 6 Measuring probes T456C F1R with calibration foils Designation of measuring probe Device version Design probe Measuring range 45800 μm Ident. No. U. pr. E T456C F1S F axial 650 O. R. Working height min. 85 mm T456C F1R F rectangular 655 O. R. working height min. 38 mm 0-1500 T456C FNF1S FNF axial 660 O. R. Working height min. 88 mm T456C FNF1R FNF rectangular 665 O. R. working height min. 38 mm h Other measuring probes such as telescope, miniature and PINIP probes on request. Prod. Gr. 451 The PINIP probes enable one-hand measurements with layer thickness measuring units with separate probes. Additional version for temperatures up to 250 ° C available. Further information and quotation available on request. t Technical Hotline +49 (0)711 9813-366 2011/12 891
Layer and wall-thickness measurements Ultrasonic wall-thickness measuring devices Testing equipment Continued next page Ultrasonic wall thickness measuring devices Selection overview Application: •non-destructive testing the material thickness (wall thickness) for all materials that conduct sound, e. g. metals, non-ferrous metals, ceramic, plastics, glass •for parts where straightforward mechanical measuring the wall thickness is not possible or is very difficult, e. g. measuring hollow parts (tubes, pipes, vessels, oil tanks) •corrosion testing hollow parts, especially for pipes and tanks, by measuring the residual wall thickness •for mobile use Model ECHOMETER 1075 Basic TN 230-0.1 US PocketMike Executions Compact measuring device with integrated Display unit with separate test head test head Standard test head Testing frequency in MHz 4 5 5 Test head Ø in mm 16 10 12 Measuring range on steel in mm 1-250 1) 1,2-230 2) 1-250 Measuring range sound speed m /s 100-19999 1000-9999 - Application temperature in °C - 10 up to + 50 - 20 up to + 60 - 10 up to + 50 Further test heads X X - Coupling control X X X Automatic detection test head detection X X - Measuring modes Single-point measurements (higher accuracy Single-point measurements and scan mode Single-point measurements from mean-value formation) (10 measurements/s) Display unit Units mm / inch (switchable) Digit increment in mm 0.1 or 0.01 (switchable) 0,1 < 100: 0,01 ≥ 100: 0,1 Display modes Absolute value Deviation from the nominal value Absolute value min. wall thickness Tolerance limits with alarm mode X - - Internal data memory - 20 files (100 measurements per file) - Device calibration to integrated calibration X X - standard (steel) Material calibration (material thickness and sound speed) X Pre-requisite: Reference piece of known material thickness Tolerance limits X - - 1) Measuring range in steel with special low-frequency head, up to 400 mm 2) Measuring range in steel with special low-frequency head, up to 300 mm Continued next page Ultrasonic wall thickness measuring devices TN 230-0.1 US Execution: •handy measuring device (weight 245 g), with large graphic display with background lighting, userfriendly clear text menu, integrated standard cable •standard test head Ø 10 mm, overall height 68 mm, testing frequency 5 MHz measuring range: Wall thickness1.2 - 230 mm (steel), digit increment 0.1 mm sound speed 1000 - 9999 m /s •single-point measurements or scan mode (10 measurements/s) •internal data memory, 20 files (up to 100 measurements per file) •power supply: 2 batteries, battery life approx. 150 h •power Off-Function Scope of delivery: measuring device with test head 5 MHz, batteries (2 x Mignon 1.5 V, type AA), 70 ml Display unit TN 230-0.1 US with optional miniature test head coupling, operating instructions, in a plastic case Other test heads and accessories: see following table Designation 45900 46100 Ident. No. U. pr. E U. pr. E TN 230-0.1 US 1) Measuring device with standard test head 5 MHz 010 O. R. – Coupler 500 ml bottle 090 – O. R. Miniature test head Ø 6 mm, testing frequency 7 MHz, angled cables, overall height 110 O. R. – 25 mm, measuring range 0.75 - 80 mm, in steel Test head Ø 12 mm for hot test objects, testing frequency 7 MHz, housing Ø 16 mm, 115 (O. R.) – overall height 86 mm, with ceramic protective ring Ø 44 mm, measuring range 1 - 225 mm for temperatures up to 50 °C, in steel, measuring range 4-100 mm for temperatures up to 300 °C, in steel Spare part: Standard test head Ø 10 mm, testing frequency 5 MHz 150 (O. R.) – Spare batteries see No. 56815 021 page 1384 Calibration of the test head available on request h On request available: 1) Model TN 230-0.01 US with digit increment value 0.01 mm, interface RS232C, incl. software ATU-05 for data export in the PC 2) Low-frequency test head, frequency 2.5 MHz, for measuring range 3 - 300 mm. Test head dimensions Ø 14 mm, height 27 mm. Further information and quotations available on request. t Technical Hotline +49 (0)711 9813-366 Prod. Gr. 451 Application example with standard test head 892 2011/12
Page 1 and 2: Testing equipment Chapter overview
Page 3 and 4: Optical observation and control dev
Page 21 and 22: Hardness testing and metallography
Page 29 and 30: Ultrasonic cleaning Ultrasonic clea
Page 35 and 36: Force measurement and weighing tech
Page 49: Layer and wall-thickness measuremen
Page 53 and 54: Temperature and ambient conditions
Page 59 and 60: Contour and roughness measurements
Page 61 and 62: Contour and roughness measurements
Page 63 and 64: Time, speed and frequency measureme

HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?