HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

Contour and roughness measurements
Contour measuring devices
Continued next page
Contour and roughness measuring units ConturoMatic CV250 and CV250 digital
High-quality CNC controlled measuring devices for the measurement of simple and complex contours on
single or series parts. Suited for measuring laboratories and fine measuring rooms.
Properties:
•contour measurement
•basic system: hard rock plate (W x D = 640 x 400 mm), with vertical column (Z axis travel 500 mm)
•measuring unit with CNC-controlled X/Z axes
•PC with software ConturoMatic T, 19" TFT monitor, printer
Option: support and adjustment table (travel manual X/Y = 200 x 13 mm)
Technical data:
ConturoMatic CV250 CV250 digital
Sensing
from above
Measuring system induction Digital
Measuring range Z/X mm 50 x 250 70 x 250
Error limits X μm ± 5 ± 3
Error limits Z μm ± 5 ± 5
Traverse rate
mm
/s 15
Measuring speed
mm
/ s 0,25-1,75
Max. table load Kg 50
h Further extensive accessories on request.
Prod. gr. 369
Additional information, advice and quotations available on request.
t Technical Hotline +49 (0)711 9813-366
70
mm
250 mm
ConturoMatic CV250 digital with supporting table
Continued next page
Contour and roughness measuring units ConturoMatic T1 / T2
High-quality CNC controlled measuring devices for the measurement of simple and complex contours and
roughness (model ConturoMatic T1) on single or series parts. Suited for measuring laboratories and fine
measuring rooms.
Properties:
•Model T1 contour and roughness measurement
Model T2 contour measurement
•basic system: hard rock plate B x T = 860 x 250 mm, vertical column with integrated, CNC-controlled Z-
axis, X-axis CNC-controlled, non-contact optical measuring systems
•shifting supporting table, adjustment range in Y direction 13 mm
•2 standard probe arms for contour measurement, 1 roughness probe arm (T1, T3), more probe arms available
•PC with software ConturoMatic T, 19" TFT monitor, printer
Technical data:
ConturoMatic T1 T2
Types of measurement
Contour measurement
Contour measurement
option roughness measurement)
Sensing from above or from below from above
Measuring range Contour Z/X mm 320 x 250 320 x 250
Error limit Z/X 1,5 μm + 10*L * 10 -6 1,5 μm + 10*L * 10 -6
Measuring range roughness Z/X mm ± 0,5 x 250 (1) –
Precision class roughness class I according to DIN/ISO
Roughness characteristic variables DIN EN ISO 4287, 13562-2, VDA 2006 (Rmax),
DB factory standard 31007 (R3z)
Traverse rate
mm
/s 25
Measuring speed contour
mm
/ s 0,1-3
Measuring speed roughness
mm
/ s 0,1-0,5
Max. table load Kg 15 15
(2)
By means of an aerostatic guiding system.
Prod. gr. 369
h Further extensive accessories on request.
Additional information, advice and quotations available on request.
t Technical Hotline +49 (0)711 9813-366
ConturoMatic T1
Testing equipment
Continued next page
Measurement and evaluation software ConturoMatic T for Windows XP
•clear operator interface, all functions can be called via mouse click
•determination of standard geometries, interfaces, shape deviations, highest/lowest points on contours/
elements etc.
•multi-contour capability: up to 10 contours in one representation assessable to each other
•report generator, export to Word, Excel etc.
•sensing tip compensation
h Further extensive accessories on request.
Prod. gr. 369
Additional information, advice and quotations available on request.
t Technical Hotline +49 (0)711 9813-366
ConturoMatic evaluation example:
Multi-contour capability
2011/12
899