HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

More documents

Recommendations

Info

Contour and roughness measurements Contour measuring devices Continued next page Contour and roughness measuring units ConturoMatic CV250 and CV250 digital High-quality CNC controlled measuring devices for the measurement of simple and complex contours on single or series parts. Suited for measuring laboratories and fine measuring rooms. Properties: •contour measurement •basic system: hard rock plate (W x D = 640 x 400 mm), with vertical column (Z axis travel 500 mm) •measuring unit with CNC-controlled X/Z axes •PC with software ConturoMatic T, 19" TFT monitor, printer Option: support and adjustment table (travel manual X/Y = 200 x 13 mm) Technical data: ConturoMatic CV250 CV250 digital Sensing from above Measuring system induction Digital Measuring range Z/X mm 50 x 250 70 x 250 Error limits X μm ± 5 ± 3 Error limits Z μm ± 5 ± 5 Traverse rate mm /s 15 Measuring speed mm / s 0,25-1,75 Max. table load Kg 50 h Further extensive accessories on request. Prod. gr. 369 Additional information, advice and quotations available on request. t Technical Hotline +49 (0)711 9813-366 70 mm 250 mm ConturoMatic CV250 digital with supporting table Continued next page Contour and roughness measuring units ConturoMatic T1 / T2 High-quality CNC controlled measuring devices for the measurement of simple and complex contours and roughness (model ConturoMatic T1) on single or series parts. Suited for measuring laboratories and fine measuring rooms. Properties: •Model T1 contour and roughness measurement Model T2 contour measurement •basic system: hard rock plate B x T = 860 x 250 mm, vertical column with integrated, CNC-controlled Z- axis, X-axis CNC-controlled, non-contact optical measuring systems •shifting supporting table, adjustment range in Y direction 13 mm •2 standard probe arms for contour measurement, 1 roughness probe arm (T1, T3), more probe arms available •PC with software ConturoMatic T, 19" TFT monitor, printer Technical data: ConturoMatic T1 T2 Types of measurement Contour measurement Contour measurement option roughness measurement) Sensing from above or from below from above Measuring range Contour Z/X mm 320 x 250 320 x 250 Error limit Z/X 1,5 μm + 10*L * 10 -6 1,5 μm + 10*L * 10 -6 Measuring range roughness Z/X mm ± 0,5 x 250 (1) – Precision class roughness class I according to DIN/ISO Roughness characteristic variables DIN EN ISO 4287, 13562-2, VDA 2006 (Rmax), DB factory standard 31007 (R3z) Traverse rate mm /s 25 Measuring speed contour mm / s 0,1-3 Measuring speed roughness mm / s 0,1-0,5 Max. table load Kg 15 15 (2) By means of an aerostatic guiding system. Prod. gr. 369 h Further extensive accessories on request. Additional information, advice and quotations available on request. t Technical Hotline +49 (0)711 9813-366 ConturoMatic T1 Testing equipment Continued next page Measurement and evaluation software ConturoMatic T for Windows XP •clear operator interface, all functions can be called via mouse click •determination of standard geometries, interfaces, shape deviations, highest/lowest points on contours/ elements etc. •multi-contour capability: up to 10 contours in one representation assessable to each other •report generator, export to Word, Excel etc. •sensing tip compensation h Further extensive accessories on request. Prod. gr. 369 Additional information, advice and quotations available on request. t Technical Hotline +49 (0)711 9813-366 ConturoMatic evaluation example: Multi-contour capability 2011/12 899
Contour and roughness measurements Contour measuring devices Testing equipment Continued next page Roughness and contour measuring units DIAVITE DH-8 and DIAVITE Compact II Standard – measuring sizes – technical data Standards: ISO/DIN, JIS, ISO 12085 (CNOMO) (1) Measuring variables in accordance with DIN/ISO: Ra, Rz (DIN) R3z, Rmax, Rt, Rq (RMS), Rk, Rpk, Rvk, MR1. MR2, Rpc, percentage contact area Rmr (DIAVITE DH-7 only with output on printer) Measuring variables in accordance with JIS: Ra, Rz Measuring variables in accordance with ISO 12085: R, Ar, Rx DIAVITE DH-8 DIAVITE COMPACT II Roughness and contour measuring unit Roughness measuring units Profile filter Gauss filter according to DIN EN ISO 11562 Measuring section Lm mm 0,4/1,25/4/12,5 1,25/4/12,5 Key tracks Lt freely selectable mm 0.5 to 15 0.5 to 15 Limit shaft length – Cut-off Lc mm freely selectable (2) 0.,00 (from) 0.08/0.25/0.8/2.5 fix (3) 0.25/0.8/2.5 Measuring range / numerical increment Ra/Rq μm 0-35/0.01 (values < 0.1 μm : 0.001) other characteristic variables μm 0-350/0,1 Keying speed mm/s 0,25/0,5/1,0 0,5 Measuring units mm/inch Diamond probe tip Radius 5 μm/90° (4) Measuring range contour measurement (option DIAVITE contour see page 902) X-direction mm 0,5-15 - Z-direction mm max. 6 - Tracing angle of falling / rising edges ° up to 88 / up to 77 - (1) Standard of the French automotive industries. (2) Can be switched off for profile values (DIAVITE DH-8) (3) Cutoff Lc fix connected with key track Lt. (5) Optional: Probe tip 2 μm/60°. Continued next page Roughness and contour measuring unit DIAVITE DH-8 Application: portable, precise and easy-to-handle measuring device for roughness and contour measurement for manufacturing area and measuring room. For standards, measuring sizes and technical data see page 900 Device variants for roughness measurements: •DIAVITE DH-8 VH, evaluation/display unit with integrated thermo-printer and feed unit VH for glide probe •DIAVITE DH-8 VHF, same as DIAVITE DH-8 VH, but with feed unit type VHF for glide probes or reference surface probes (free tracer) Execution: •large monochrome graphic display •feed unit with integrated start button •freely selectable traversed length of tracer •memory for 50 measurements •8 measuring programs can be saves •automatic calibration •7 buttons, can be calibrated •USB interface data output •software DIASOFT Basic •on request: – data transfer and surface roughness analysis by the software DIASOFT standard (see page 902) – model DIAVITE DH-8 Bluetooth with data transfer via Bluetooth •power supply integrated NiMH battery, power pack Delivery DIAVITE DH-8 VH: Display unit with thermo-printer, type VH feed unit, standard tracer SH, diamond tracer tip 5 μm/90°, connection cable to feed unit, for rechargeable battery, power pack/charger, CD with software DIASOFT Basic to transmit measured values to Excel, USB connection cable to PC, metal calibration master, transport case Delivery DIAVITE DH-8 VHF: same as DIAVITE DH-8 VH, but with feed unit type VHF Designation DIAVITE DH-8 VH DIAVITE DH-8 VHF 44805 Ident. No. 706 716 Unit price E O. R. (O. R.) h Further accessories: page 902. Additional information, advice or quotation available on request. t Technical Hotline +49 (0)711 9813-366 Prod. Gr. 445 900 2011/12
Page 1 and 2:
Testing equipment Chapter overview
Page 3 and 4:
Optical observation and control dev
Page 5 and 6:
Optical observation and control dev
Page 7 and 8: Optical observation and control dev
Page 21 and 22: Hardness testing and metallography
Page 29 and 30: Ultrasonic cleaning Ultrasonic clea
Page 35 and 36: Force measurement and weighing tech
Page 49 and 50: Layer and wall-thickness measuremen
Page 51 and 52: Layer and wall-thickness measuremen
Page 53 and 54: Temperature and ambient conditions
Page 55 and 56: Temperature and ambient conditions
Page 57: Temperature and ambient conditions
Page 61 and 62: Contour and roughness measurements
Page 63 and 64: Time, speed and frequency measureme
show all

HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

Create successful ePaper yourself

Delete template?

Save as template?