HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

More documents

Recommendations

Info

Layer and wall-thickness measurements Ultrasonic wall-thickness measuring devices Continued next page Ultrasonic wall thickness measuring devices ECHOMETER model 1075 Basic Execution: handy measuring device (weight 250 g), with large graphic display with background lighting, user-friendly clear text menu, integrated calibration master •measuring ranges: wall thickness see information on test head, sound speed 100-19999 m /s •digit increment reversible 0.1 mm / 0.01 mm •three display mode for optimum adjustment to the measuring task: Standard = absolute wall thickness, Difference = deviation from the set value, Minimum = min. wall thickness •limit value monitoring with alarm mode (display modes standard, min.) •power supply: 2 batteries, battery life approx. 150 h, battery capacity display •power-off function •rubber protection frame with integrated support bracket Scope of delivery: measuring device with batteries (2 x Mignon 1.5 V, type AA), 100 ml coupling, operating instructions, manufacturer's certificate, case Test heads and accessories: see following table Designation 46100 Ident. No. U. pr. E ECHOMETER 1075 Basic 1) Measuring and display unit (without test head) 052 O. R. Ident. No. 052 and 080 Standard test head DSE 10.4/6PB4 2) , testing frequency 4 MHz, measuring range 1.2 to 070 O. R. 250 mm, in steel, test head Ø 16 mm, overall height 30 mm Grip sleeve for standard test head for use of protection foils on rough surfaces 072 (O. R.) Protection foil set for standard test head, set with 10 pieces 074 (O. R.) Miniature test head DSE 4.2/4PB 8, testing frequency 8 MHz, measuring range 0.7 to 080 O. R. 25 mm, in steel, test head Ø 8 mm, housing Ø 13 mm, overall height 15 mm Coupler 500 ml bottle 090 O. R. h On request available: 1) Echometer 1075 Data with interface RS232C, measured-value memory up to 9.999 measurements and data export in PC or printer Echometer 1076 C for measuring the wall thickness on coated parts 2) Low-frequency head DSE 18/25 PB2, frequency 2 MHz, for measuring range up to 400 mm. Test head dimensions Ø 24 mm, height 33 mm. Spare batteries see No. 56815 021 page 1384 Further information and quotations available on request. t Technical Hotline +49 (0)711 9813-366 Prod. Gr. 451 Ident. No. 070 and 072 Ident. No. 070 and 080 Testing equipment Continued next page Ultrasonic wall-thickness measuring devices PocketMIKE Execution: portable, compact thickness gauge, comprising measuring device and integrated interchangeable measuring head (5 MHz), [ thus one-hand operation possible rotating LCD display with background lighting and shut-off timer 4 function keys Toggle mm/inch unit, automatic zero-point alignment, calibration to known wall thickness (1-point-calibration) and to sound speed. Scope of delivery: measuring device with interchangeable measuring head (5 MHz), carrying strap, coupling (100 ml), battery 1 x Mignon 1.5 V, type AA, operating instructions, manufacturer certificate, transport box Measuring range (Steel) mm 1-250 Numerical increment mm < 100: 0,01; ≥ 100: 0,1 Housing Ø/ housing height mm 35 / 100 Test head Ø mm 12 Weight (incl. test head and battery) Kg 0,150 Designation 46100 Ident. No. U. pr. E Set pr. E PocketMIKE Wall thickness measuring device 500 O. R. – Coupler for T = –20 to 100 °C, pack of 5 bottles of 250 g 520 – O. R. h Spare batteries see No. 56815 021 page 1384. Further information and quotations available on request. t Technical Hotline +49 (0)711 9813-366 Prod. Gr. 451 2011/12 893
Temperature and ambient conditions monitoring Temperature and air-humidity measuring devices Continued next page Temperature measuring devices with universal probe This measuring device is optimally designed to measure temperatures of surfaces, air and pure liquids. Scope of delivery: display unit with universal probe and battery Measuring range °C –100 to +500 Numerical increment K 0,1 Error limits ±0.1 % v. MW ± 3 digit Power supply 9V block Dimensions mm 150 x 60 x 26 46105 Ident. No. 030 Unit price E O. R. Prod. Gr. 490 Testing equipment Continued next page Temperature measuring devices and data loggers ALMEMO ® Execution: modern, compact housing with large 2-line LCD-display at ALMEMO 2450/2490 or graphic display with white background illumination for ALMEMO 2590. Advantage: all ALMEMO temperature probes and sensors are fitted with EEProm plug which has stored the elementary sensor data so that the measuring device is automatically configured when being connected (plug and play). More than just a temperature measuring device: the ALMEMO measuring devices can be used very universally even with other sensors. Measuring variables such as current, voltage, resistance, pressure, power, path, humidity, speed, flow, flow rate, ozone, oxygen, light, pH-value can be displaced with the corresponding ALMEMO sensor system. Scope of delivery: with batteries (3x 1.5 V Mignon, type AA), without sensor No. 46120the practical and low-cost ALMEMO starter set Delivery: •measuring device type ALMEMO 2450-1L, No. 46130 011 •temperature sensor type FTA 122 L 0050 H, No. 46130 215 •with batteries (3x 1.5 V Mignon, Type AA) •in the handy and stable stand-by case Model ALMEMO 2450-1L ALMEMO 2490-1L ALMEMO 2490-2 ALMEMO 2590-3S Handy measuring device Handy measuring device in the starting set Precision measuring device Universal measuring device Data logger Number of measuring inputs 1 1 2 3 Measuring range/ digit increments with standard probe –199.9 to +400 °C Thermo elements type L, J, U, T, S, N, R, B –199.9 to +1760 °C –270.0 to +1800.0 °C Probe type FT... NiCr-Ni (K) –199.9 to +1370 °C –200.0 to +1370.0 °C Probe type FP... Pt100 - –200.00 to +400.00 °C (850.0 °C) Probe type FN... NTC –50.00 to +125.00 °C –50.00 to +125.00 °C Error limits ±0.1 % v. MW ± 3 digit ±0.03 % v. MW ± 2 digit ±0.03 % v. MW ± 2 digit Additional functions Max/Min/Hold/Reset Max/Min/Hold/Reset/sensor harmonization same as ident. No. 032, additional mean value, individual values, twopoint comparison, graduation Measured value storage - 100 values 59 KB / approx. 10.000 values (optional: Memory stick with SD card available on request) Data output Digital output, optional cable for RS232, USB, Bluetooth and - - Ethernet Power supply Battery operation Battery operation Battery operation, optionally with power supply unit Dimensions 127 x 83 x 42 Number 46120 46130 Model 2450-1L measuring device set 2450-1L 2490-1L 2490-2 2590-3S Ident. No. 050 011 021 032 042 Unit price E O. R. O. R. O. R. (O. R.) (O. R.) h Suitable accessories on request: Stand-by case for measuring device and probe for all models. Rubber holster for better grip and additional impact protection of housing. Data cable (RS232, USB, Bluetooth or Ethernet) and power part for models 2490-2 and 2590-3S Spare batteries see No. 56815 021 page 1384. If you need detailed information, please contact us. t Technical Hotline +49 (0)711 9813-366 Prod. Gr. 453 894 2011/12
Page 1 and 2: Testing equipment Chapter overview
Page 3 and 4: Optical observation and control dev
Page 21 and 22: Hardness testing and metallography
Page 29 and 30: Ultrasonic cleaning Ultrasonic clea
Page 35 and 36: Force measurement and weighing tech
Page 49 and 50: Layer and wall-thickness measuremen
Page 51: Layer and wall-thickness measuremen
Page 55 and 56: Temperature and ambient conditions
Page 57 and 58: Temperature and ambient conditions
Page 59 and 60: Contour and roughness measurements
Page 61 and 62: Contour and roughness measurements
Page 63 and 64: Time, speed and frequency measureme

HAHN+KOLB-Toolcatalog 2011/12 – Testing equipment

Create successful ePaper yourself

Delete template?

Save as template?