Manual NISE 3500 - ICPDAS-EUROPE
Manual NISE 3500 - ICPDAS-EUROPE
Manual NISE 3500 - ICPDAS-EUROPE
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3: System Setup<br />
Removing the Chassis Cover<br />
CAUTION!<br />
Prior to removing the chassis cover, make sure the unit’s power is<br />
off and disconnected from the power sources to prevent electric<br />
shock or system damage.<br />
3. Lift up the cover and then remove it from the chassis.<br />
1. The screws on the cover are used to secure the cover to the chassis.<br />
2. Remove these screws and then put them in a safe place for later use.<br />
The dots denote the locations of the screws.<br />
4. Battery: one removable lithium BR2032 is pre-installed in <strong>NISE</strong> <strong>3500</strong><br />
series. (CAUTION: Risk of explosion if the battery is replaced by an incorrect<br />
type. Dispose of used batteries according to the instructions.)<br />
5. Optional Power adapter: Suggest to use an appropriate AC/DC power<br />
adapter compliant with CE or UL safety regulations.<br />
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 35 <strong>NISE</strong> <strong>3500</strong>, <strong>NISE</strong> <strong>3500</strong>M User <strong>Manual</strong>