Manual NISE 3500 - ICPDAS-EUROPE
Manual NISE 3500 - ICPDAS-EUROPE
Manual NISE 3500 - ICPDAS-EUROPE
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
S5 RTC Wake Settings<br />
This section is used to configure the wake up function.<br />
Advanced<br />
Wake System with Fixed Time<br />
BIOS SETUP UTILITY<br />
[Disabled]<br />
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.<br />
Enable or Disable<br />
system wake on alarm<br />
event. When enabled,<br />
system will wake on the<br />
hr::min::sec specified.<br />
→ ←: Select Screen<br />
↑↓: Select Item<br />
Enter: Select<br />
+/-: Change Opt.<br />
F1: General Help<br />
F2: Previous Values<br />
F3: Optimized Defaults<br />
F4: Save ESC: Exit<br />
Wake System with Fixed Time<br />
Enables or disables the system’s wake on alarm event. When enabled, the<br />
system will wake up on the specified time.<br />
CPU Configuration<br />
This section is used to configure the CPU. It will also display detected<br />
CPU information.<br />
CPU Configuration<br />
Advanced<br />
Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz<br />
EMT64<br />
Processor Speed<br />
Processor Stepping<br />
Microcode Revision<br />
Processor Cores<br />
Intel HT Technology<br />
Hyper-Threading<br />
Active Processor Cores<br />
Limit CPUID Maximum<br />
Hardware Prefetcher<br />
Adjacent Cache Line Prefetch<br />
Intel Virtualization Technology<br />
Power Technology<br />
TDC Limit<br />
TDP Limit<br />
BIOS SETUP UTILITY<br />
Supported<br />
2527 MHz<br />
20652<br />
9<br />
2<br />
Supported<br />
[Enabled]<br />
[A11]<br />
[Disabled]<br />
[Enabled]<br />
[Enabled]<br />
[Disabled]<br />
[Energy Efficient]<br />
0<br />
0<br />
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.<br />
Enabled for Windows XP<br />
and Linux (OS optimized<br />
for Hyper-Threading<br />
Technology) and Disabled<br />
for other OS (OS not<br />
optimized for<br />
Hyper-Threading<br />
Technology). When<br />
Disabled only one thread<br />
per enabled core is<br />
enabled.<br />
→ ←: Select Screen<br />
↑↓: Select Item<br />
Enter: Select<br />
+/-: Change Opt.<br />
F1: General Help<br />
F2: Previous Values<br />
F3: Optimized Defaults<br />
F4: Save ESC: Exit<br />
Hyper-Threading<br />
Enable this field for Windows XP and Linux which are optimized for Hyper-<br />
Threading technology. Select disabled for other OSes not optimized for<br />
Hyper-Threading technology. When disabled, only one thread per enabled<br />
core is enabled.<br />
Active Processor Cores<br />
Used to enter the number of cores to enable in each processor package.<br />
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 52 <strong>NISE</strong> <strong>3500</strong>, <strong>NISE</strong> <strong>3500</strong>M User <strong>Manual</strong>
Change language