Structure of Actuator KNX S-B4T-UP 230 V AC - IQmarket

If “Use shading automatic: Yes“ has been selected:
Brightness:
--------------------------------------
Type of shading input
1 x 1 Bit • 1 x 16 Bit • 2 x 16 Bit • 3 x 16 Bit
Up-movement delay in min 0 … 255
Down-movement delay in min 0 … 30
If “Type of shading input 1 x 16 bit / 2 x 16 bit / 3 x 16 bit“ has been selected:
The measured values of one, two or three light sensors may be evaluated. The highest
value is the value which is always relevant for the reaction.
Shading threshold value standard by
Parameter • Communication object
If “Shading threshold standard by parameter” has been selected:
Shading threshold value standard by
Parameter
Shading threshold value in klux 0 … 100
Up-movement delay in min 0 … 255
Down-movement delay in min 0 … 30
Send current shading status
No • Yes
If “Shading threshold standard by communication object” has been selected:
Shading threshold value standard by
The last-communicated value shall be
maintained
Starting threshold value in klux
valid until 1st communication
Type of threshold value change
Step size in klux
(only in case of “Increment/decrement with
comm. object”)
Communication object
• not
• after restoration of voltage
• after restoration of voltage and programming
0 … 100
• Absolute value with 16 bit comm. object
• Increment/decrement with one comm. object
• Increment/decrement with two comm.objects
1 … 5
Up-movement delay in min 0 … 255
Down-movement delay in min 0 … 30
Send current shading status
No • Yes
Position of the sun:
--------------------------------------
Evaluate the position of the sun
No • Yes
If “Evaluate of the position of the sun: Yes“ has been selected:
Evaluate the position of the sun
Yes
41