Structure of Actuator KNX S-B4T-UP 230 V AC - IQmarket

More documents

Recommendations

Info

If “Type of input object 1 bit“ has been selected, only the window opening may be set (position in %). If ”Type of input object 16 bit“ has been selected: Indoor temperature threshold value standard Parameter • Communication object per If “Indoor temperature threshold value standard per parameter” has been selected: Indoor temperature threshold value standard Parameter per Indoor temperature threshold value in 0.1°C 100 … 500 Hysteresis in 0.1°C 0 … 100 Send current temperature status No • Yes If “Indoor temperature threshold value standard per communication object” has been selected: The last -ommunicated value shall be maintained Starting threshold value in 0.1 °C valid until 1st communication Type of threshold value change Step size (only in case of “Increment/decrement with comm. object") • not • after restoration of voltage • after restoration of voltage and programming 100 … 500 • Absolute value with 16 bit comm. object • Increment/decrement with one comm. object • Increment/decrement with two comm. objects 0,1 °C … 5 °C Hysteresis in 0.1 °C 0 … 100 Send current temperature status No • Yes If “Type of input object 16 bit target/actual temperature“ has been selected: The target value is provided by the communication object. Open if actual value exceeds target value by 0 … 255 (in 0.1 °C) Hysteresis in 0.1 °C 0 … 100 Send current temperature status No • Yes Indoor air humidity: -------------------------------------- If “Open window in case of too high (…) room air humidity“ has been selected: Type of input object 1 Bit • 16 Bit 51
If “Type of input object 1 bit“ has been selected, only the window opening may be set (position in %). If “Type of input object 16 bit“ has been selected: Indoor humidity threshold value in % 0 … 100 Hysteresis in % 0 … 100 Send current humidity status No • Yes Window opening Note: In case of the control of indoor temperature or humidity with a 1 bit input object, the window opening may only be indicated as an absolute value in %. Window opening absolute in % • step-by-step If “Window opening absolute in %“ has been selected: Window opening absolute in Window opening in % 1 … 100 If “Window opening step-by-step” has been selected: Window opening step-by-step Step-by-step by (in %) 1 … 100 every (in minutes) 1 … 60 52
Page 1 and 2: KNX S-B4T-UP 230 V and KNX S-B4T-UP
Page 3 and 4: KNX S-B4T-UP • from software vers
Page 5 and 6: Current: Output: Inputs: Data outpu
Page 7 and 8: Installation and Commissioning Inst
Page 9 and 10: No. Name Function Flags DP type 21
Page 11 and 12: No. Name Function Flags DP type 86
Page 13 and 14: Setting of parameters General setti
Page 15 and 16: If “Accomplish reference run: Yes
Page 17 and 18: If “Use operating range limit: Ye
Page 19 and 20: In case of automatic operation afte
Page 21 and 22: Dawn control / time control Use daw
Page 23 and 24: Position of the sun is defined by
Page 25 and 26: Roller shutter control The setting
Page 27 and 28: Travel position for slave in % if i
Page 29 and 30: Change from manual to automatic Man
Page 35 and 36: Awning control The setting options
Page 37 and 38: Monitoring period for zero position
Page 39 and 40: In case of automatic operation afte
Page 45 and 46: Window control Use operating range
Page 47 and 48: (Zero position sensor at input 4 of
Page 49 and 50: Change from manual to automatic Man
Page 51: If “Use coercive ventilation: Yes
Page 55 and 56: Inverted standard control mode In c
Page 57 and 58: Send value Send value every (only i
Page 59 and 60: Brightness encoder If “Bus functi
Page 61 and 62: Temperature sensor For the “Gener
Page 63 and 64: If “Threshold value standard per
Page 65 and 66: Zero position sensor master over bu

Structure of Actuator KNX S-B4T-UP 230 V AC - IQmarket

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?