Structure of Actuator KNX S-B4T-UP 230 V AC - IQmarket

More documents

Recommendations

Info

Type of input object 1 Bit • 16 Bit If “Type of input object 1 Bit“ has been selected: Use wind block Yes Type of input object Waiting time in safe position in min after wind block Behaviour after waiting period: In case of manual operation before and after wind alarm In case of automatic operation after blocking 1 Bit 0 … 255 no action • move to last position follow automatic If “Type of input object 16 bit“ has been selected: Use wind block Yes Type of input object From wind speed in m/s closing-command Waiting time in safe position in min after wind block Behaviour after waiting period: In case of manual operation before and after wind alarm In case of automatic operation after blocking Send current block status 16 Bit 2 … 30 0 … 255 no action • move to previous position follow automatic No • Yes Priority of rain block or manual operation The following priorities must be observed: Rain prior to manual • Manual prior to rain Rain block Use rain block No • Yes If “Use rain block: Yes“ has been selected: Note: In case of block, the window closes. Waiting time in safe position in min 0 … 20 after rain block Behaviour after waiting period: In case of manual operation before and after block In case of automatic operation after blocking no action • move to last position follow automatic 47
Change from manual to automatic Manual changes to automatic after Waiting time in min (only if “…expiration of waiting period“ has been selected) Change to automatic for object value (only if “receipt of object…“ has been selected) • Expiration of waiting period • Receipt of an object • Receipt of an object or expiration of waiting period 1 … 255 0 • 1 • 0 or 1 Further settings Use automatic blocking object No • Yes If “Use automatic blocking object: Yes” has been selected: Use automatic blocking object Yes Automatic is blocked at 0 • 1 Value of the blocking object after restoration of voltage 0 • 1 Operation mode after restoration of voltage Send status object Transmission delay of the status output automatic or manual in 0.1 sec Type of automatic Automatic • Manual 1 for automatic | 0 for manual • 0 for automatic | 1 for manual • 0 … 50 external automatic • internal automatic 48
Page 1 and 2: KNX S-B4T-UP 230 V and KNX S-B4T-UP
Page 3 and 4: KNX S-B4T-UP • from software vers
Page 5 and 6: Current: Output: Inputs: Data outpu
Page 7 and 8: Installation and Commissioning Inst
Page 9 and 10: No. Name Function Flags DP type 21
Page 11 and 12: No. Name Function Flags DP type 86
Page 13 and 14: Setting of parameters General setti
Page 15 and 16: If “Accomplish reference run: Yes
Page 17 and 18: If “Use operating range limit: Ye
Page 19 and 20: In case of automatic operation afte
Page 21 and 22: Dawn control / time control Use daw
Page 23 and 24: Position of the sun is defined by
Page 25 and 26: Roller shutter control The setting
Page 27 and 28: Travel position for slave in % if i
Page 29 and 30: Change from manual to automatic Man
Page 35 and 36: Awning control The setting options
Page 37 and 38: Monitoring period for zero position
Page 39 and 40: In case of automatic operation afte
Page 45 and 46: Window control Use operating range
Page 47: (Zero position sensor at input 4 of
Page 51 and 52: If “Use coercive ventilation: Yes
Page 53 and 54: If “Type of input object 1 bit“
Page 55 and 56: Inverted standard control mode In c
Page 57 and 58: Send value Send value every (only i
Page 59 and 60: Brightness encoder If “Bus functi
Page 61 and 62: Temperature sensor For the “Gener
Page 63 and 64: If “Threshold value standard per
Page 65 and 66: Zero position sensor master over bu

Structure of Actuator KNX S-B4T-UP 230 V AC - IQmarket

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?