Structure of Actuator KNX S-B4T-UP 230 V AC - IQmarket

More documents

Recommendations

Info

Actuator push button For the “General settings“, “Input 1 / 2 / 3 / 4 as actuator push button“ has been selected. If monitoring periods or operation range limits are used, the operation with a push button is not possible in case of a bus voltage breakdown. Push button function Control mode Up • Down (blind) Up • Down • Up/Down (roller shutter) Retract • Extend • Retract/Extend (awning) Close • Open • Open/Close (window) • Standard • Standard inverted • Comfort mode • Dead man’s control Standard control mode In case of short actuation, the drive mechanism moves step-by-step and stops, respectively. In case of long actuation, the drive mechanism moves to the end position. Time between short and long in 0.1 sec 1 … 50 53
Inverted standard control mode In case of short actuation, the drive mechanism moves to the end position. In case of long actuation, the drive mechanism moves step-by-step and stops, respectively. Time between short and long in 0.1 sec 1 … 50 Repetition of the step command for long key pressure none • every 0.1 … 2 sec Comfort mode In comfort mode, short, longer and long pressing of the push button triggers different reactions of the drive mechanism. The short pressing of the push button (shorter than adjustable time 1) results in a stepby-step positioning of the drive mechanism. If the drive mechanism shall be moved a little, the push button is pressed a bit longer (longer than time 1 but shorter than time 1+2) The drive mechanism immediately stops as soon as the push button has been released. If the drive mechanism shall move self-dependently to its end position, the push button is only released after the expiration of time 1 and 2. The travel may be stopped by a short pressing. Time 1 Time 2 0 1 1 + 2 Time 0 Pressing of the push button, starting of time 1 Release before the expiration of time 1: Time 1 Release after the expiration of time 1 but before the expiration of time 2: Release after the expiration of time 1 + 2: Step (or stop in case of running drive mechanism) End of time 1, start of time 2, travel command Stop Travel in end position Time1 Time2 0,2 … 2 s 0,2 … 3 s Dead man’s control The drive mechanism travels as soon as the push button is pressed and stops, when the push button is released. 54
Page 1 and 2:
KNX S-B4T-UP 230 V and KNX S-B4T-UP
Page 3 and 4: KNX S-B4T-UP • from software vers
Page 5 and 6: Current: Output: Inputs: Data outpu
Page 7 and 8: Installation and Commissioning Inst
Page 9 and 10: No. Name Function Flags DP type 21
Page 11 and 12: No. Name Function Flags DP type 86
Page 13 and 14: Setting of parameters General setti
Page 15 and 16: If “Accomplish reference run: Yes
Page 17 and 18: If “Use operating range limit: Ye
Page 19 and 20: In case of automatic operation afte
Page 21 and 22: Dawn control / time control Use daw
Page 23 and 24: Position of the sun is defined by
Page 25 and 26: Roller shutter control The setting
Page 27 and 28: Travel position for slave in % if i
Page 29 and 30: Change from manual to automatic Man
Page 35 and 36: Awning control The setting options
Page 37 and 38: Monitoring period for zero position
Page 39 and 40: In case of automatic operation afte
Page 45 and 46: Window control Use operating range
Page 47 and 48: (Zero position sensor at input 4 of
Page 49 and 50: Change from manual to automatic Man
Page 51 and 52: If “Use coercive ventilation: Yes
Page 53: If “Type of input object 1 bit“
Page 57 and 58: Send value Send value every (only i
Page 59 and 60: Brightness encoder If “Bus functi
Page 61 and 62: Temperature sensor For the “Gener
Page 63 and 64: If “Threshold value standard per
Page 65 and 66: Zero position sensor master over bu
show all

Structure of Actuator KNX S-B4T-UP 230 V AC - IQmarket

Create successful ePaper yourself

Delete template?

Save as template?