TM/TMC/RM/RMC-2040GE Progressive Scan Cameras - JAI Pulnix
TM/TMC/RM/RMC-2040GE Progressive Scan Cameras - JAI Pulnix
TM/TMC/RM/RMC-2040GE Progressive Scan Cameras - JAI Pulnix
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Page 7<br />
<strong>TM</strong>/<strong>RM</strong>-<strong>2040GE</strong> Software<br />
FIGURE 7.<br />
HR10A-10R-12P<br />
1 9<br />
2 10 8<br />
3 11 12 7<br />
4<br />
5<br />
6<br />
2.2 Ethernet<br />
The GigE socket, marked on the camera’s back panel as GigE, is a standard RJ-45 Ethernet socket. Use<br />
at least cat5e UTP cables (Cat6 cables are preferred). If you wish to connect the camera directly to a PC,<br />
you must use a cross-over cable. Refer to the Cam2Net User's Manual for details. 1<br />
FIGURE 8.<br />
Ethernet GigE Socket<br />
GigE<br />
1. <strong>JAI</strong> recommends the use of shielded cables to reduce emissions and for CE/FCC<br />
compliance. Double-shielded cables further reduce emissions.<br />
Connectors