General Catalog

Professional IC Systems
«ProfIC 4 – Anion» – Professional IC system with
inline dilution
Professional IC system for the fully automatic determination
of anions in concentrated solutions. «ProfIC 4»
can be used to analyze samples the concentration of
which is too high to be determined directly.
Ionic concentrations that are too high overload the column,
which results in a poor chromatographic separation
and therefore adversely affects the accuracy of the
measurement.
«ProfIC 4» allows the automatic inline dilution of each
sample. Dilution takes place at an external position of
the 858 Professional Sample Processor. In combination
with transfer tubing the 800 Dosino carries out the
high-precision liquid handling steps.
The MagIC Net software controls the dilution steps
and carries out all calculations, so that only the dilution
factor needs to be entered in the sample table. In
addition, the software provides for intelligent dilution,
i.e. dilution takes place automatically depending on the
predefined concentration limits. The software monitors
the results and makes logical decisions.
«ProfIC 4» features intelligent system components
such as the iPump, the iDetector and the 800 Dosino
and provides space for a total of three iColumns.
The anion system is equipped with sequential suppression.
This unique combination of chemical and
downstream CO 2
suppression results in very low detection
limits. The flexibility of the carbonate eluent is
Ordering information
ProfIC 4 - Anion
«ProfIC 4 – Anion» – Professional IC
system with inline dilution
Technical information
Components
1 x 2.800.0010 800 Dosino
1 x 2.801.0010 801 Magnetic Stirrer
1 x 2.850.2030 850 Professional IC
1 x 2.858.0020 858 Professional Sample Processor
1 x 6.1562.130 Transfer Tubing / 10 mL
1 x 6.2744.200 Adapter UNF 10/32 / M6
1 x 6.3032.210 Dosing unit complete / 10 mL
1 x 6.5330.020 IC Equipment for dilution
IC column, sample rack, sample vials as well as MagIC
Net have to be ordered separately according to the
particular application.
complemented by the low background conductivity of
a hydroxide eluent.
The 858 Professional Sample Processor with Pump provides
for the sample transfer. Numerous sample racks
for volumes 0.5...500 mL are available.
28 — IC