General Catalog

Automation in titration
Swing Heads
Additional equipment for the Robotic Sample Processor
XL for transferring / pipetting from small sample vessels
into larger titration vessels on a rack or into an external
titration cell which can be attached to the left of the
work station.
If a Swing Head is used then the number of samples
and their sizes can be varied within a wide range.
This increased flexibility results from the fact that
the range of positions on the Sample Processor that
can be reached is considerably extended. The Swing
Head works with highest accuracy: it moves pipet /
transfer tips from one position to the next millimeter by
millimeter. Even sample transfer into an external titration
cell is carried out fully automatically, thus greatly
increasing the flexibility of the Sample Processor. While
the transferred sample is being analyzed in the cell, the
next sample can already be in preparation; this means
an additional gain in time. In addition, the Swing Head
can also be equipped with Robotic Arms which can
take up and eject tools or even serve as a holder for a
homogenizer for crushing tablets.
Ordering information
2.786.0010 786 Swing Head with transfer head left
2.786.0020 786 Swing Head with transfer head
right
2.786.0030 786 Swing Head with titration swing
arm, left or right swinging
2.786.0040 786 Swing Head
2.786.0140 786 Swing Head right swinging
strengthend
Reinforced 786 Swing Head
22 — AT