General Catalog

Professional IC Systems
«ProfIC 9 – Anion» – Professional IC system
for trace analysis with inline calibration, sample
preconcentration and matrix elimination
Professional IC system for ultratrace analysis in the
lowest ppt range (ng/L) of anions in complex matrices.
«ProfIC 9» with Metrohm inline sample preconcentration
and matrix elimination allows chromatography
unaffected by matrix influences and guarantees that
the analytical column has a long working life.
Metrohm inline calibration permits very low concentrations
– in the lowest ppt range – to be reliably calibrated
using a single standard of higher concentration
– in the ppb range.
The sample is transferred to the preconcentration
column fully automatically and with high precision by
the intelligent 800 Dosino. The anions are retained.
The matrix can be removed in a rinsing step. The clean
sample is then injected to the IC system.
The 850 Professional IC – Prep 2 is equipped with
an additional valve for liquid handling. The peristaltic
pump transfers the standard solutions. The intelligent
MagIC Net software controls and monitors the system.
Calibration and calculation of the results as a function
of preconcentration volume are also provided by the
MagIC Net software. Even if complex procedures are
involved, operating the system is perfectly easy.
Ordering information
ProfIC 9 - Anion
«ProfIC 9 – Anion» – Professional IC
system for trace analysis with inline
calibration, sample preconcentration
and matrix elimination
Technical information
Components
1 x 2.800.0010 800 Dosino
1 x 2.850.2150 850 Professional IC
1 x 2.858.0010 858 Professional Sample Processor
1 x 6.1014.200 Metrosep I Trap 1 Column
1 x 6.1562.130 Transfer Tubing / 10 mL
3 x 6.1805.190 FEP tubing / M6 / 11 cm
1 x 6.1808.000 Connection bushing M6
1 x 6.1808.060 T connector / M6
1 x 6.2744.080 M6 thread/UNF 10/32 coupling
2 x 6.2744.200 Adapter UNF 10/32 / M6
1 x 6.2841.100 Rinsing Station for Sample Processor
1 x 6.3032.210 Dosing unit complete / 10 mL
1 x 6.5330.040 IC Equipment for Liquid Handling
IC column, sample rack, sample vials as well as MagIC
Net have to be ordered separately according to the
particular application.
The anion system is equipped with sequential suppression.
Very high sensitivity is achieved by this unique
combination of chemical and downstream CO 2
suppression.
The flexibility of the carbonate eluent is complemented
by the low background conductivity of a
hydroxide eluent. With the preconcentration technique
carbonate interference is practically eliminated.
The 858 Professional Sample Processor holds the samples.
Numerous sample racks for volumes 0.5...500 mL
are available. Typical preconcentration volumes are
between 0.5...100 mL.
33 — IC