General Catalog

Automation in titration
849 Level Control
• Increases laboratory safety
• Protects pumps from running dry
• For universal use
• Simple assembly and configuration
Additional equipment for Sample Processors for monitoring
the filling level of rinsing or waste canisters via
Remote. It prevents pumps from running dry and/or
canisters from overflowing and is suitable for use with
aqueous solutions, solvents and suspensions.
Ordering information
2.849.0010 849 Level Control
The sensor signal is registered by the Level Control and
transmitted as a signal level to a remote connection of
an automated system. This means that the Level Control
can be used in all Metrohm systems in which it is
possible to scan remote lines.
The Level Control can register both high liquid levels
(e.g. warning that a waste container is about to overflow)
and low liquid levels (e.g. storage container is
about to be emptied). Thanks to the conductivity
measurement technique the level sensors can be used
in different media.
849 Level Control
20 — AT