General Catalog

Dosing devices
865 Dosimat plus
Dispensing Unit for manual titration and dosing applications.
Including push-button cable for manual dispensing
control and 6.3026.220 Exchange Unit 20 mL.
A wide variety of instruments can be connected to
the USB interface of the Dosimat plus; with a USB hub
you can even connect several devices simultaneously
(keyboard, mouse, USB compact printer or standard
USB DIN A4 printer, USB stick for methods and data
backup). The optional 6.2148.030 RS 232/USB Box
allows laboratory balances to be connected.
The Dosimat plus is suitable for a wide range of applications
with its four dosing modes:
DOS (Dosing)
Push-button dosing, particularly suitable for carrying
out manual titrations with a color indicator. From the
added volume the result can be automatically calculated
and a report printed out. Different calculation
variables can be defined as parameters beforehand.
XDOS (Extended Dosing)
Adding a fixed volume: the volume and the dosing rate
are predefined.
Time-controlled dosing: the volume and the time are
predefined.
Dosing by dosing rate: the dosing rate and the time are
predefined.
Ordering information
2.865.0010 865 Dosimat plus
Options
6.3026.110 Exchange unit / 1 mL
6.3026.150 Exchange unit / 5 mL
6.3026.210 Exchange unit / 10 mL
6.3026.220 Exchange unit / 20 mL
6.3026.250 Exchange unit / 50 mL
If continuous dosing without interruption is required
then the 865 Dosimat plus can be operated in tandem
mode together with an 805 Dosimat.
CNT D (Content dosing):
This mode is used for the preparation of standards and
other solutions. From the size of the starting substance
(solid or stock solution) and the predefined target
concentration, the 865 Dosimat plus automatically
determines the volume of solvent to be added. After
completing the dosing, a report featuring all the relevant
information about the prepared solution can be
printed out.
LQT (Liquid transfer):
This mode is used for pipetting and diluting liquids.
865 Dosimat plus
— LH