Manual - E-LAB Computers
Manual - E-LAB Computers
Manual - E-LAB Computers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Programming directly<br />
UPP1-X In-Circuit Programmer with USB-2<br />
Interactive programming must be started with this button of the PC application.<br />
The entire chip is erased including the lock bits and then totally reprogrammed. The fuse and lock bits<br />
are treated as described in Options.<br />
The MMC card is not necessary as the PC and the program has all necessary data.<br />
It is further possible to program via PC but to use a project from the MMC card.<br />
The download dialoge is opened by the<br />
button.<br />
Select the project by a click in the list box.<br />
This enables the erase, verify and pro buttons.<br />
prog Chip programs the CPU<br />
If the chip is not read protected verify Chip reads<br />
and compares the CPU with the PC memory.<br />
Print outputs a hardcopy of the list to the printer<br />
Please note that with portable use (offline) only<br />
project number 0 is available for programming<br />
UPP/S has a rotary switch on the rear that allows the<br />
selection of one from 10 possible projects.<br />
The file numbers correspond to the switch position<br />
(0..9). The arrow in the list shows the actual position<br />
of the rotary switch. Without option “S” it shows<br />
always Position.0.<br />
File Info shows the relevant parameters of the<br />
selected project.<br />
26 · AVRProg Software E-<strong>LAB</strong> <strong>Computers</strong>