Download - Buderus
Download - Buderus
Download - Buderus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6<br />
Installation<br />
6.6 Installation of the flue gas adapter<br />
(included in the scope of delivery)<br />
Before installing the exhaust and air intake system, it is<br />
necessary to remove the transport safety device and to<br />
install the flue gas adapter.<br />
NOTICE<br />
The transport safety device has been installed<br />
to prevent unwanted movement of the heat<br />
exchanger during transport.<br />
• Remove the transport safety device with the two screws<br />
(see fig. 13).<br />
Fig. 13<br />
Removing the transport safety device<br />
• Remove the protective cap from the internal condens<br />
bypass pipe. Place the flue gas adapter and connect the<br />
internal condens bypass pipe (see fig. 14).<br />
Fig. 14<br />
Placing the flue gas adapter<br />
• Screw on the flue gas adapter using six screws (see<br />
fig. 15).<br />
Fig. 15<br />
Connecting the flue gas adapter<br />
20<br />
Logamax plus GB142-24/30/45/60 - We reserve the right to make any changes due to technical modifications!