NV52/NV54/NV56/NV58 Service Guide - tim.id.au
NV52/NV54/NV56/NV58 Service Guide - tim.id.au
NV52/NV54/NV56/NV58 Service Guide - tim.id.au
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
98<br />
CHAPTER 3: Replacing notebook components<br />
Replacing the webcam<br />
Tools you need to complete this task:<br />
Phillips #0 screwdriver<br />
Flat screwdriver or Non-marring plastic scribe<br />
Screws removed during this task:<br />
• 1 black M2×5 (hard drive)<br />
• 1 black M2.5×6 (optical drive)<br />
• 3 black M2.5×6 (keyboard cover)<br />
• 2 black M2.5×6 (LCD panel hinges - bottom)<br />
• 2 black M2.5×6+Nylok (LCD panel hinges - top)<br />
• 4 black M2.5×6+Nylok (LCD front panel)<br />
• 2 chrome M2×4 (LCD hinge covers)<br />
• 4 black M2.5×6+Nylok (LCD front panel)<br />
To replace the webcam:<br />
1 Complete the steps in “Preparing the notebook” on page 47.<br />
2 Remove the LCD panel assembly by performing steps 2–15 of the<br />
“Replacing the LCD panel assembly” procedure on page 64.<br />
3 Remove the LCD front panel by performing steps 3–7 of the “Replacing the<br />
LCD front panel” procedure on page 95.<br />
4 Disconnect the webcam board cable.
Change language