NV52/NV54/NV56/NV58 Service Guide - tim.id.au
NV52/NV54/NV56/NV58 Service Guide - tim.id.au
NV52/NV54/NV56/NV58 Service Guide - tim.id.au
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
58<br />
CHAPTER 3: Replacing notebook components<br />
Replacing the keyboard cover<br />
Tools you need to complete this task:<br />
Phillips #0 screwdriver<br />
Flat screwdriver or Non-marring plastic scribe<br />
Screws removed during this task:<br />
• 3 black M2.5×6 (keyboard cover)<br />
To replace the keyboard cover:<br />
1 Complete the steps in “Preparing the notebook” on page 47.<br />
2 Complete the steps in “Removing the battery” on page 48.<br />
3 Remove the screws securing the keyboard cover.<br />
4 Turn the notebook over and open the LCD panel to its fully extended position.<br />
5 Insert a small flat-blade screwdriver or non-marring scribe between the LCD<br />
hinge s<strong>id</strong>e and the keyboard cover, and carefully pry the cover up.
Change language