NV52/NV54/NV56/NV58 Service Guide - tim.id.au
NV52/NV54/NV56/NV58 Service Guide - tim.id.au
NV52/NV54/NV56/NV58 Service Guide - tim.id.au
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.gateway.com<br />
Removing the bay cover<br />
To remove or replace components located on the lower bay, you need to remove<br />
the bay cover first.<br />
Tools you need to complete this task:<br />
Phillips #0 screwdriver<br />
Non-marring plastic scribe<br />
To remove the bay cover:<br />
1 Complete the steps in “Preparing the notebook” on page 47.<br />
2 Turn the notebook over so the base is facing up.<br />
3 Loosen the bay cover screws (these screws cannot be removed).<br />
4 Insert a non-marring plastic scribe on the cover’s notch to release the cover<br />
from the computer, and then remove the cover.<br />
49
Change language