TSUBAKI EMERSON CAM CLUTCH
TSUBAKI EMERSON CAM CLUTCH
TSUBAKI EMERSON CAM CLUTCH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071<br />
MX SERIES <strong>CAM</strong> <strong>CLUTCH</strong><br />
■ MODELS MX 22 TO MX 70<br />
For Indexing Applications<br />
q Inner race<br />
w Outer race<br />
e Cam cage assembly<br />
r Bearing<br />
t Snap ring<br />
y Oil seal<br />
u Lubrication filler plug<br />
Dimensions and Capacities<br />
Model<br />
Max.<br />
Torque<br />
(N·m)<br />
Max.<br />
Indexing<br />
(cycle/min.)<br />
Stock Bore Size<br />
Dia.<br />
(H7)<br />
Keyway<br />
MX22<br />
MX35<br />
MX50<br />
MX70<br />
78.4<br />
235<br />
441<br />
784<br />
1,200<br />
1,200<br />
1,200<br />
1,200<br />
22<br />
35<br />
50<br />
70<br />
6 × 2.8<br />
10 × 3.3<br />
14 × 3.8<br />
20 × 4.9<br />
80<br />
90<br />
100<br />
127<br />
Note: Above torque is based on 10 8 times load cycles.<br />
A<br />
B<br />
(h7)<br />
C<br />
95 77<br />
125 87<br />
155 97<br />
200 124<br />
D<br />
80<br />
110<br />
140<br />
180<br />
E<br />
12<br />
12<br />
14<br />
15<br />
F<br />
35<br />
50<br />
70<br />
100<br />
S<br />
H-M<br />
No. of<br />
Tapped Holes<br />
× Size × Pitch<br />
Lubrication<br />
Filler Plug<br />
Size × Pitch<br />
16<br />
16<br />
16<br />
20<br />
4 × M 8 × P1.25<br />
4 × M 8 × P1.25<br />
6 × M 8 × P1.25<br />
6 × M10 × P1.5<br />
M6 × P1.0<br />
M6 × P1.0<br />
M8 × P1.25<br />
M8 × P1.25<br />
Inertia<br />
Inner Race<br />
(kg·m 2 )<br />
0.000150<br />
0.000625<br />
0.00275<br />
0.0130<br />
Overrun.<br />
Drag<br />
(N·m)<br />
Dimensions in mm<br />
0.470<br />
1.36<br />
2.68<br />
5.15<br />
Oil<br />
(cc)<br />
80<br />
110<br />
190<br />
340<br />
Weight<br />
(kg)<br />
3.3<br />
6.4<br />
10.6<br />
21.3<br />
Installation and Usage<br />
1. For installation, insert the clutch<br />
into the hub bore of a pulley, a<br />
gear, or a torque arm and screw<br />
the bolts (high tension) into the<br />
tapped holes in the end face of<br />
the clutch. See illustration on the<br />
right.<br />
2. A press fit is required for MX<br />
Series clutches for indexing<br />
applications, but do not exceed<br />
0.025 mm when press fitting.<br />
3. Adjust the side of the key to fit<br />
the keyway tightly, but allow a<br />
clearance between the top of<br />
key and keyway.<br />
4. When mounting the clutch on a<br />
shaft, apply pressure to the<br />
clutch inner race end, but never<br />
to the outer race.<br />
5. Proper selection of the Cam<br />
Clutch provides accurate<br />
indexing performance. A braking<br />
device and a backstopping<br />
device may also be required for<br />
more accurate performance.<br />
6. The tolerance of the hub bore<br />
should be H6 or H7.<br />
Typical installation drawings<br />
MX Series<br />
• See “Information for Selection” on page 73.<br />
• See “Lubrication and Maintenance” on<br />
page 75.<br />
www.bergab.ru Берг АБ bergab@ya.ru Тел. 40 (495)-228-06-21, факс (495) 223-3071
Change language