TSUBAKI EMERSON CAM CLUTCH
TSUBAKI EMERSON CAM CLUTCH
TSUBAKI EMERSON CAM CLUTCH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071<br />
BREU SERIES <strong>CAM</strong> <strong>CLUTCH</strong><br />
Capacities<br />
Torque Capacity Inner Race Overrunning Speed<br />
Model<br />
BREU 30 (K)<br />
BREU 35 (K)<br />
BREU 40 (K)<br />
BREU 45 (K)<br />
BREU 50 (K)<br />
BREU 55 (K)<br />
BREU 60 (K)<br />
BREU 70 (K)<br />
BREU 80 (K)<br />
BREU 90 (K)<br />
BREU100 (K)<br />
BREU130 (K)<br />
BREU150 (K)<br />
N·m<br />
607<br />
686<br />
980<br />
1078<br />
1715<br />
1960<br />
3479<br />
4735<br />
6517<br />
8526<br />
14210<br />
20384<br />
33908<br />
Min. (r/min)<br />
880<br />
780<br />
720<br />
670<br />
610<br />
580<br />
490<br />
480<br />
450<br />
420<br />
460<br />
420<br />
370<br />
Max. (r/min)<br />
3600<br />
3600<br />
3600<br />
3600<br />
3600<br />
3600<br />
3600<br />
3600<br />
3600<br />
3000<br />
2500<br />
2200<br />
1300<br />
Max. Engagement<br />
Speed (r/min)<br />
350<br />
300<br />
300<br />
280<br />
240<br />
220<br />
200<br />
200<br />
190<br />
180<br />
180<br />
180<br />
180<br />
General Information for Installation and Usage<br />
11. BREU series is a modular type Cam Clutch which is delivered as a BREU series Basic type or BREU-K series<br />
with option parts (E1, E2, E5, E7 flanges, E3 Torque arm and E4 cover) which are required as separate parts.<br />
12. All models are pre-greased.<br />
The operational temperature range is –40°C to +40°C.<br />
Too much additional grease to both bearing inhibits the basic Cam Clutch function. Refer to page 63 for the<br />
maintenance.<br />
13. We recommend a Shaft tolerance of h7, and DIN6885.1 keyway is standard.<br />
14. We recommend tolerance of B and E H7 or H8 for sprockets, gears and other fitted parts.<br />
15. Clean the surface of both end of the outer race and the contact surfaces of the flanges, torque arm and<br />
cover.<br />
16. Verify the direction of rotation and attach the flanges, torque arm or cover.<br />
17. When installing sprocket, gear, and other equipment to the clutch, fit them on the surface of the flange by<br />
using hexagon socket cap screws.<br />
18. By installing each option part on the opposite side, the direction of rotation can be changed.<br />
19. Fix the grease nipple and set screw to the option parts.<br />
10. When mounting the clutch onto the shaft, apply pressure to the inner race but never to the outer race. Tap the<br />
inner race lightly with a soft hammer moving around the race circumference so the Cam Clutch moves slowly<br />
and uniformly onto the end of the shaft.<br />
11. Do not use grease that contains EP additives.<br />
12. Model No. BREU K<br />
No Mark : No keyway on the outer race.<br />
K : Keyway on the outer race.<br />
www.bergab.ru Берг АБ bergab@ya.ru Тел. 56 (495)-228-06-21, факс (495) 223-3071