Panasonic 2-Line 2.4GHz MultiTalk Expandable - Radio Shack

Intercom
A 2-way intercom is possible between the handset and the base unit.
When the system has one or more additional handsets (p. 31), a 2-way
intercom is also possible between two handsets. You can call all handsets
from the base unit at once.
The handset included with the base unit has the extension number 1
which has “[1]” on the display, and the base unit has the extension
number 0. Each additional handset is assigned the number at registration
(p. 31).
Making Intercom Calls
Handset
1
Press (HOLD) (INTERCOM).
SP PRIVACY [1]
Press extension#
to call
2
To
3
When
page the base unit, press (0).
•The base unit will ring for 1 minute.
•To stop paging, press (OFF).
the paged party answers, talk into the
handset.
•You can switch to the speaker by pressing
. To switch back to the receiver, press
.
LINE1
Calling [0]
Intercom
01
LINE1
LINE2
LINE2
Intercom
00-00-05
01
MONITOR
MUTE
4
To
end the intercom, press (OFF).
Off
00-00-50
To page another handset (when the system
has additional handsets, p. 31):
Press (HOLD) (INTERCOM), and enter the
extension number using the dialing button
((1) to (8)).
•The destination handset will ring for 1 minute.
To end the intercom, press (OFF) or place the
handset on the base unit or the charger.
Ex. Handset 2 calling
Calling [2]
Intercom
12
LINE1
LINE2
MUTE
64