TM 3-4240-334-20&P
TM 3-4240-334-20&P
TM 3-4240-334-20&P
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TM</strong> 3-<strong>4240</strong>-<strong>334</strong>-20&P<br />
Item<br />
No.<br />
lnterval<br />
Item to<br />
Check/Service<br />
Procedure<br />
Not Fully Mission<br />
Capable If:<br />
11<br />
Semi-<br />
Annual<br />
BLOWER<br />
ASSEMBLY<br />
a.<br />
Check air distribution tubes (1)<br />
for cracks, breaks, and<br />
alinement.<br />
Air distribution tubes are cracked<br />
broken, or bent.<br />
b.<br />
Check that wiper seals (2) are<br />
not cut, torn, or missing.<br />
Either wiper seal is cut, torn, or<br />
missing.<br />
c.<br />
Ensure that both snap hooks<br />
(3) are present.<br />
Snap hooks are missing.<br />
d.<br />
Check that blower assembly<br />
release D-ring (4) and latch pin<br />
(5) work properly.<br />
Blower release latch pin does<br />
not retract.<br />
e.<br />
Check that knob (6), pushbutton<br />
(7), and LED (8) are<br />
present and not broken.<br />
Knob, pushbutton, or LED is<br />
missing or broken.<br />
CAUTION<br />
Do not attempt to tighten or<br />
adjust screw; damage to<br />
blower assembly may<br />
result.<br />
f.<br />
Check screw (9) for red antitamper<br />
seal.<br />
Red anti-tamper seal is cracked,<br />
chipped or broken, indicating<br />
possible screw rotation.<br />
2-27
Change language