TM 3-4240-334-20&P
TM 3-4240-334-20&P
TM 3-4240-334-20&P
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TM</strong> 3-<strong>4240</strong>-<strong>334</strong>-20&P<br />
CHAPTER 1<br />
INTRODUCTION<br />
Section I. GENERAL INFORMATION<br />
1-1. SCOPE.<br />
a. Type of Manual. This is a unit maintenance manual including repair parts and special tools list<br />
(RPSTL) for use with the M43A1.<br />
b. Equipment Name and Model Number. Mask, Chemical-Biological: Aircraft M43A1.<br />
c. Purpose of Equipment. To protect face, eyes, and respiratory system from field concentrations of<br />
Chemical-Biological (CB) agents and Riot Control (RC) agents.<br />
d. Special Limitations on Equipment. Does not protect against ammonia or carbon monoxide gases.<br />
Does not protect the user in an oxygen deficient environment.<br />
1-2. MAINTENANCE FORMS AND PROCEDURES.<br />
Department of the Army forms and procedures used for equipment maintenance will be those<br />
prescribed by DA PAM 738-750, The Army Maintenance Management Systems (TAMMS) as contained in<br />
Maintenance Management Update.<br />
1-3. DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE.<br />
Refer to <strong>TM</strong> 43-0002-31, Destruction of Chemical Weapons and Defense Equipment to Prevent Enemy<br />
Use, for methods of destruction.<br />
1-4. PREPARATION FOR STORAGE OR SHIPMENT.<br />
For instructions concerning storage or shipment, refer to para 2-17.<br />
1-5. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR).<br />
If your mask needs improvement, let us know. Send us an EIR, You, the user, are the only one who can<br />
tell us what you don’t like about your equipment. Let us know why you don’t like the design or performance. Put<br />
it on an SF 368 (Quality Deficiency Report). Mail it to Commander, U.S. Army Armament Munitions and Chemical<br />
Command, ATTN: AMSMC-QAD (R), Rock Island, IL 61299-6000. We will send you a reply.<br />
1-6. SAFETY, CARE, AND HANDLING.<br />
Caution must be used when handling contaminated masks and canisters. Decontamination procedures<br />
for the facepiece assembly and blower assemblies can be found in para 2-19. For decontamination of other<br />
components of the M43A1 mask, follow procedures in FM 3-5.<br />
Caution must also be used when using n-amyl acetate to check facepiece for leaks. It is flammable,<br />
could irritate the skin under prolonged exposure, and may be toxic if inhaled in quantity. For first aid information,<br />
see FM 21-11.<br />
1-1