TM 3-4240-334-20&P
TM 3-4240-334-20&P
TM 3-4240-334-20&P
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TM</strong> 3-<strong>4240</strong>-<strong>334</strong>-20&P<br />
c. Webbing Strap Replacement.<br />
INITIAL SETUP<br />
Tools<br />
Materials/Parts<br />
Tool Kit, Electronic Equipment TK Pin, Straight, Headed PN 5-1-1464<br />
105G (Item, App B, Sect. III) Ring, Retaining PN MS 16633-4012<br />
REMOVAL<br />
NOTE<br />
These procedures apply to the removal and installation of either webbing strap.<br />
1. Pull retaining ring (1) from pin (2).<br />
2. Remove straight headed pin (2).<br />
3. Remove webbing strap (3).<br />
INSTALLATION<br />
1. Place new webbing strap (3) in bracket (4) so open<br />
side of fastener faces toward blower inlet.<br />
2. Insert new straight headed pin (2) through top of<br />
bracket (4) and webbing strap loop (5).<br />
3. Snap new retaining ring (1) onto straight headed pin (2).<br />
2-65
Change language