TM 3-4240-334-20&P

TM 3-4240-334-20&P
1.7. CORROSION PREVENTION AND CONTROL (CPC).
a. Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important
that any corrosion problems with this item be reported so that the problem can be corrected and improvements
can be made to prevent the problem in future items.
b. While corrosion is typically associated with rusting of metals, it can also include deterioration of other
materials such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may
be a corrosion problem.
c. If a corrosion problem is identified, it can be reported using Standard Form 368, Use of key words
such as corrosion, rust, deterioration, or cracking will assure that the information is identified as a CPC problem.
d. The Standard Form 368 should be submitted to:
Commander
U.S. Army Armament, Munitions and Chemical Command
ATTN: AMSMC-QAD (R) Customer Feedback Center
Rock Island, Illinois 61299-6000
1-8. NOMENCLATURE CROSS-REFERENCE LIST.
Common Name
Nuclear Hood
Canister Seal
Voicemitter Gasket
Hose Restraint Clip
Lanyard Restraint Loop
Waist Strap
Snap Hook
Canisters
Battery Cap
O-Ring
Spring
Official Nomenclature
CB Mask Hood
Non-metallic Seal
Packing, Preformed
Lanyard Retainer Assembly
Non-Elastic Hose Loop Assembly
Carrier, Webbing Strap
Hook Assembly
CB Mask Canister
Battery Filter Cap
Preformed Packing
Helical Spring
1-9. LIST OF ABBREVIATIONS.
CB
HDU
IHADSS
IPD
LED
RC
SARVIP
VDC
Chemical and Biological
Helmet Display Unit
Integrated Helmet and Display Sighting System
Interpupillary Distance
Light Emitting Diode
Riot Control
Survival Armor Recovery Vest Insert and Pocket
Voltage Direct Current
Section II. EQUIPMENT DESCRIPTION AND DATA
Paragraphs containing information on equipment characteristics, capabilities, and features;
description of major components; equipment data; and differences between models can be found in Chapter 1
of TM 3-4240-334-10, Operator’s Manual for the M43A1 Mask.
1-2