JAEA-Data/Code 2007-004 - Welcome to Research Group for ...

setenv fu50 $SRAC DIR/lib/burnlibT/$BRN ............................. (l)
setenv fu85 $SRAC DIR/lib/kintab.dat ................................ (m)
# setenv fu89 $ODR/$CASE.SFT89.$DATE.................................. (n)
# setenv fu98 $ODR/$CASE.SFT98.$DATE.................................. (o)
setenv fu99 $ODR/$CASE.SFT99.$DATE .................................. (p)
set OUTLST = $ODR/$CASE.SFT06.$DATE.................................. (q)
#
#============= Exec SRAC code with the following input data =============
#
cd $WKDR
cat - & $OUTLST...................................... (r)
TEST
SRAC INPUT for Cell Calculation by Pij
Input Data
1 1 1 1 0 1 4 3 -2 1 0 0 0 0 2 0 1 0 0 0 / SRAC CONTROL
2.77396E-4 / GEOMETRICAL BUCKLING
/home/Administrator/SRACLIB-JDL33/pds/pfast Old File
/home/Administrator/SRACLIB-JDL33/pds/pthml O F ........... (s)
/home/Administrator/SRACLIB-JDL33/pds/pmcrs O F
$PDS DIR/UFAST
Scratch Core
$PDS DIR/UTHERMAL S C
$PDS DIR/UMCROSS S C
$PDS DIR/MACROWRK S C ................................ (t)
$PDS DIR/MACRO New C
$PDS DIR/FLUX S C
$PDS DIR/MICREF S C
62 45 2 1 / 107 group => 3 group
62(1) /
:
:
:
END DATA................................................................ (u)
#
#======== Remove scratch PS files ===========================================
#
cd $HOME
rm -r $WKDR .......................................................... (v)
#
#======== Remove PDS files if you don't keep them ===========================
#
# rm -r $PDS DIR
#
rm -r $PDS DIR/UFAST
rm -r $PDS DIR/UTHERMAL
rm -r $PDS DIR/UMCROSS
rm -r $PDS DIR/MACROWRK
# rm -r $PDS DIR/MACRO
rm -r $PDS DIR/FLUX
rm -r $PDS DIR/MICREF
.......................................... (w)
Underlined statements below indicate actions by user when he uses the above shell-script.
(a) In the shell-script, several native UNIX commands are used, however, the user may customize
their operations. By using ‘alias’ command, it is recovered to native ones during this process.
(b) Specify the SRAC system by full path directory name.
(c) Specify the SRAC load module (executable) in the directory file ~SRAC/bin/.
A load module, ‘SRAC.100m’ by name is usually installed by the equipped installer
(@PunchMe). This load module is made to be executable on the memory within about 100Mbyte.
For a large-scale problem, another load may be necessary. It can be made by using a shell-script,
192