Vigilohm System - engineering site - Schneider Electric
Vigilohm System - engineering site - Schneider Electric
Vigilohm System - engineering site - Schneider Electric
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
044146<br />
<strong>Vigilohm</strong>: functions and characteristics<br />
communicating <strong>Vigilohm</strong> <strong>System</strong><br />
XLI200, XLI300, XTU300 and XAS communication interfaces<br />
use<br />
When two or more communicating devices<br />
(XM300C, XML308/316, XL308/316 or<br />
XD308C) are used or when communication<br />
with a supervisor is required, it is necessary<br />
to connect one (and only one) interface to<br />
the communication bus.<br />
If no XTU300 or XLI300 interface is<br />
included, operation of the <strong>Vigilohm</strong> <strong>System</strong><br />
bus will require an XAS interface.<br />
functions<br />
The interface allows communication<br />
between the <strong>Vigilohm</strong> <strong>System</strong> and a<br />
supervisor or PLC using a JBUS type<br />
protocol (except X25).<br />
It transmits the information provided by the<br />
<strong>Vigilohm</strong> <strong>System</strong>:<br />
c prevention and fault alarms from XM300C<br />
or XML308/316 monitoring devices (only<br />
XM300C for XLI200);<br />
c fault alarms from XML308/316 or<br />
XM308/316 locators (except XLI200);<br />
c insulation resistance and capacitance<br />
measurements;<br />
c threshold settings;<br />
c fault alarms and faulty circuit identification<br />
from XD308C detectors.<br />
The interface also allows the thresholds to<br />
be set form the supervisor.<br />
device XLI200 XLI300 XTU300 XAS<br />
function<br />
interface between the <strong>Vigilohm</strong> <strong>System</strong> bus and a supervisor or PLC c c c<br />
power supply to <strong>Vigilohm</strong> <strong>System</strong> bus c c c c<br />
operates with monitoring device XM300C c c c c<br />
mon.-loc. device XML308/316 c c c<br />
locator XL308/316 c c c<br />
detector<br />
XD301/312<br />
XD308C c c c c<br />
maximum configuration monitoring device XM300C and/or XML308/316 4 (1) 4 4 4<br />
locator XL308/316 8 8<br />
detector XD308C 16 8 8 8<br />
electrical characteristics<br />
auxiliary supply voltage 50/60 Hz 220/240 V AC 115/127 V AC 115/127 V AC 115/127 V AC<br />
380/415 V AC 220/240 V AC 220/240 V AC 220/240 V AC<br />
380/415 V AC 380/415 V AC 380/415 V AC<br />
500/525 V AC 500/525 V AC 500/525 V AC<br />
consumption 30 VA c c c c<br />
dielectric strength 2500 V c c c c<br />
mechanical characteristics<br />
weight gross 2.228 kg 2.228 kg 2.228 kg<br />
net 1.864 kg 1.864 kg 1.864 kg<br />
metal case with insulated front c c c c<br />
degree of protection<br />
IP30<br />
degree of protection of front<br />
IP40<br />
other characteristics<br />
interfacing possible with supervisor c c c<br />
JBUS connector Sub D 9-pin (not supplied) c c c<br />
communication with other devices via 4-wire data bus c c c c<br />
temperature range storage - 25 °C to + 70 °C<br />
operation - 5 °C to + 55 °C<br />
installation<br />
vertical mounting on front plate c c c c<br />
connection<br />
<strong>Vigilohm</strong> <strong>System</strong> bus 1.5 mm 2 tunnel terminals c c c c<br />
external bus RS485 sub D9 female connector c c c<br />
communication<br />
speed (bauds) adjustable 300... 19200 300... 19200 300... 19200<br />
per fault 9600 9600 9600<br />
data length (bits) 8 8 8<br />
parity none none none<br />
start bits 1 1 1<br />
stop bits 1 1 1<br />
(1) only XM300C.<br />
29