The EZ Guide 500 "How To Guide - New Holland PLM Portal
The EZ Guide 500 "How To Guide - New Holland PLM Portal
The EZ Guide 500 "How To Guide - New Holland PLM Portal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>The</strong> <strong>EZ</strong> <strong>Guide</strong> <strong>500</strong> "<strong>How</strong> <strong>To</strong> <strong>Guide</strong><br />
7.3 Mounting the screen<br />
<br />
<strong>The</strong> screen is mounted to the front<br />
windscreen using two suction cups. <strong>The</strong><br />
part number for the suction cups are<br />
87301269. <strong>The</strong> dealer must manufacture<br />
a bar that joins the two suction cups and<br />
also attaches the RAM Mount to mount<br />
the screen as shown in figure 7.3.<br />
Figure 7.3<br />
Note: <strong>The</strong> <strong>EZ</strong> <strong>Guide</strong> <strong>500</strong> needs two<br />
suction cups to mount it to the tractor<br />
windscreen. One Suction cup is not<br />
sufficient to hold it.<br />
Figure 7.4<br />
<br />
If the <strong>EZ</strong> <strong>Guide</strong> <strong>500</strong> screen is being used<br />
with <strong>EZ</strong> Steer or AutoPilot then the most<br />
convenient way of mounting the screen is<br />
to fix it to the bracket on the right hand<br />
door shown in Figure 7.5 and figure 7.6.<br />
This is an ideal location because the<br />
Lightbar is not needed on the windscreen<br />
when using <strong>EZ</strong> Steer, also the <strong>EZ</strong> Steer<br />
engage button is in a more convenient<br />
location. <strong>The</strong> part number for the RAM<br />
mount is ZTN68042 (U bolts must be<br />
sourced locally).<br />
Figure 7.5<br />
17