Totally Integrated Automation - Automation Technology - Siemens

Fail-safe drive system –
SINAMICS S120
Safety Integrated
Drive system for high-performance single/multiple-axis applications
• Integral safety electronics with extremely
high-speed response to safety problems
• Integral self-test routines for detecting
errors and faults
• Available safety functions:
Safe Torque Off (STO), Safe Operating Stop
(SOS), Safe Stop 1 and 2 (SS1, SS2), Safe
Direction (SDI), Safely Limited Speed
(SLS), Safe Speed Monitor (SSM), Safe
Brake Control (SBC)
• Transmission of all safety-relevant signals via hardwiring or
PROFIBUS/PROFINET with PROFIsafe
• All safety functions are supported by a setup tool
• Certified for Category 3 acc. to EN 954-1, Pl d acc. to EN ISO 13849-
1, and SIL 2 acc. to IEC 61508 or PL d (EN ISO 13849-1)
Booksize format: NFPA 79, NRTL-listed
Fail-safe drive –
SINAMICS G130/150
© Siemens AG 2011
Frequency converters for single drives in the mid to upper
performance range
• Integral safety electronics with extremely
high-speed response to safety problems
• Integral self-test routines for detecting errors
and faults
• Available safety functions:
Safe Torque Off (STO), Safe Stop 1 (SS1)
• Transmission of the safety-relevant signals
via PROFIBUS DP/PROFIsafe protocol
• The STO and SS1 functions (24V-230 V) can be optionally controlled
via the standard option K82
• All safety functions are supported by the commissioning tool
• Certified for Category 3 acc. to EN 954-1, Pl d acc. to EN ISO 13849-1,
and SIL 2 acc. to IEC61508
Siemens TIA Product Guide 2011
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
103