Totally Integrated Automation - Automation Technology - Siemens

© Siemens AG 2011
For applications in the control cabinet –
ET 200S motor starters
Standard and High Feature:
Drive technology
The fully prewired SIMATIC ET 200S motor
starters can protect and switch any threephase
load.
• Flexible direct-on-line starters, reversing starters, or soft starters;
High Feature motor starters with starter protection switches,
electronic overload protection, and contactors, or soft starters up to
7.5 kW
• Communication via PROFINET, PROFIBUS, and PROFIsafe profile
• Equipped with a self-assembling 40/50 A power bus (i.e. single load
voltage supply for a group of motor starters)
• Hot swapping is permissible
• Integrated inputs and outputs for control and status signaling
• Full diagnostics capability for active monitoring of the switching and
protection functions
• More possibilities – can be combined with various expansion modules
and safety engineering (Safety Motor Starter Solution local and
Solution PROFIsafe)
• Support of the PROFIenergy profile for energy-efficient operation
For applications in the control cabinet –
ET 200S safety motor starters (PROFIsafe)
Modular, safety-related I/O –
Assembled according to your requirements
• Fail-safe modules for the family of
bit-modular I/O devices
• You can combine fail-safe and standard I/O
in one rack
• A safety-oriented range comprises digital
inputs and outputs, relays, distributed
F-CPUs, power modules, motor starters
and frequency converters
• For applications with conventional wiring or over PROFIBUS or
PROFINET
• Frequency converters provide integral encoder-less safety functions
"Safe Torque Off", "Safe Stop 1" and "Safely Limited Speed"
• The components are certified by the German Technical Inspectorate
(TÜV) according to IEC 61508, which facilitates compliance with the
relevant standards: EN 954-1 up to Cat. 4, IEC 62061 up to SIL 3, and
EN ISO 13849-1 up to PL e
Siemens TIA Product Guide 2011
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
183